X
19mm Stainless Hand Rails - 4 Sizes
$19.00
Available in 4 lengths from 229mm to 610mm these Stainless Steel Handrails are made from 316 grade mirror finish 19mm diameter stainless steel tubing. Each end has a Marine-grade nylon base and they come with the mounting stainless bolts, nuts and washers.
Brand:
Hunts Marine
SKU: MA019-9
X
22mm Stainless Hand Rails - 4 Sizes
$19.00
Available in 4 lengths from 229mm to 610mm these Stainless Steel Handrails are made from 316 grade mirror finish 22mm diameter stainless steel tubing. Each end has a Marine-grade nylon base and they come with the mounting stainless bolts, nuts and washers.
Brand:
Hunts Marine
SKU: MA022-09
X
25mm Stainless Hand Rails - 5 Sizes
$20.20
Available in 5 lengths from 229mm to 762mm these Stainless Steel Handrails are made from 316 grade mirror finish 25mm diameter stainless steel tubing. Each end has a Marine-grade nylon base and they come with the mounting stainless bolts, nuts and washers.
Brand:
Hunts Marine
SKU: MA025-9
X
25mm Wave Pattern Grip Stainless Hand Rails - 5 Sizes
$42.50
Available in 5 lengths from 260mm to 655mm these Stainless Steel Handrails with wave pattern grip are made from 304 grade mirror finish 25mm diameter stainless steel tubing. The studs are 45mm long with 5/16" thread welded into the hand rail base. All handrails are 60mm in height above the deck. Supplied with locking nuts.
Brand:
Hunts Marine
SKU: RWB1112
X
2nd Base for Removable Cockpit Table
$59.95
Why not have a table position up the front in the bow rider section as well as down the back? This is the same table base and specs as above.Â
Brand:
Quintrex
SKU: RWB4905
X
304 Grade Stainless Folding Drink Holder
$49.95
Finally there is a really good solid top quality stainless steel folding drink holder. Made from 304 grade stainless it has spring loaded adjustable arms to grab and can or bottle size (48mm to 91mm) and has a foam coaster on the base on the inside so there is no vibration when the boat is underway. Its supplied with 2 mounting screws and when folded up the dimensions are 100mm by 105mm by 15mm.
Brand:
Hunts Marine
SKU: 37478
X
4 inch Inspection Port with Recessed Lid - Black
$19.95
New Zealand made quality 4" Nairn inspection port with recessed lid with 4 finger grips.
Brand:
Hunts Marine
SKU: W4100
X
4 inch Inspection Port with Recessed Lid - Clear with Black or White Surround
$18.95
New Zealand made quality 4" Nairn inspection port with recessed lid with 4 finger grips. Available with Black or White surround.
Brand:
Hunts Marine
SKU:
X
4 inch Inspection Port with Recessed Lid - White
$19.95
New Zealand made quality 4" Nairn inspection port with recessed lid with 4 finger grips.
Brand:
Hunts Marine
SKU: RWB4101
X
5 Draw Storage Locker
$199.95
This is a great little flush mounted storage unit and can be used for almost anything including tackle. It has 5 draws and a waterproof door. The outer dimensions are 364mm by 183mm with a depth of 150mm. Draw size is 130mm by 150mm by 50mm high.
Brand:
Hunts Marine
SKU: 173082
X
5 inch Inspection Ports - Black, White or Clear
$18.95
New Zealand made quality 5" Nairn inspection port with flush lid with 2 finger grips. available in all white, all black, clear lid with white surround or clear lid with black surround.
Brand:
Hunts Marine
SKU:
X
6 inch Inspection Ports - Black, White or Clear
$24.95
New Zealand made quality 6" Nairn inspection port with flush lid with 2 finger grips. available in all white, all black, clear lid with white surround or clear lid with black surround.
Brand:
Hunts Marine
SKU: RWB4113
X
85mm Flush Air vent with 75mm Tail - Black or White
$9.00
85mm plastic square air vent available in either black or white with a 75mm tail to suit bilge blower hose.
Brand:
Hunts Marine
SKU: RWB1665
X
90mm Flush Air Vent - Black or White
$5.00
90mm white plastic square air vent suitable for a number of different applications.
Brand:
Hunts Marine
SKU: RWB1668
X
Adjustable Hatch Arms - 2 Sizes
$49.95
Adjustable chrome plated hatch arms. One end had a ball joint and the other has swivel base so the arm will fit almost any application. Available in 2 sizes with the overall lengths being 275mm to 455mm and 350mm to 600mm.
Brand:
Hunts Marine
SKU: RWB1360
X
Alloy Hook On Ladder - 2 Sizes
$49.95
These hook on alloy ladders come in 2 sizes. The 3 rung is 850mm high and the 4 rung is 1100mm. The maximum gunwale width for the hook over arms is 200mm. They are made from heavy duty 25mm anodised aluminium tube with tough white moulded non-slip steps and rubber coated gunwale hooks with cushioned tips. The hooks and fend off feet fold flat for compact storage.
Brand:
Hunts Marine
SKU:
X
Aluminium Hatch Screens to suit above
$97.00
These trim and fly screens fit perfectly in the appropriate hatch and are an absolute must if you are going to be overnighting and want to leave the hatch open to get some fresh air. You will get eaten alive by mossies otherwise. Use the chart in the other picture to make sure you get the correct one.
Brand:
Hunts Marine
SKU: 36193
X
Barwig Singlet Faucet with Built in Switch
$39.95
Rated up to 35PSI this is a popular single adjustable faucet which is used on most boats. It has an in-built switch in the tap. Just turn the top and your good to go.
Brand:
Hunts Marine
SKU: 005953
X
Black Nylon Cleats - 4 Sizes
$3.00
Used on a lot of boats, particularly aluminium boats, these cleats are made of a strong black UV resistant nylon material. They have a flat base with two central fastening holes through the cleat posts.
Brand:
Hunts Marine
SKU: RWB950
X
Black Nylon Fairleads - 2 Sizes
$15.95
Sold as a pair (Port and Starboard), These fairleads come in 2 sizes and are made of a UV resistant black nylon.
Brand:
Hunts Marine
SKU:
X
Black Standard Glove Box
$45.00
One of the most common plastic glove boxes used in most open boats, runabouts and half cabins. It has a stylish front and is also lockable. Lid dimensions are 350mm wide and 135mm high and the box is 160mm deep.
Brand:
Hunts Marine
SKU: RWB650
X
Brass Screw in Boat Bung
$10.00
Brass screw in bung to suit most American boat brands.
Brand:
Hunts Marine
SKU: 400367
X
Cast Solid Stainless Steel Bollard - 2 Sizes
$74.95
This heavy duty solid cast 316 grade stainless steel cross bollard has been around forever and is beautifully finished and highly polished. The smaller one has a 60mm by 60mm base with an 87mm cross width and is 90mm high. The larger one has a 75mm by 75mm base with a 110mm cross width and is 115mm high. The smaller unit takes 6mm screws or bolts and the larger takes up to 8mm.
Brand:
Hunts Marine
SKU: RWB3716
X
Cast Stainless Steel Spilt Bollard with Pin - 2 Sizes
$69.95
This heavy duty cast 316 grade stainless steel split bollard with spring loaded pin allows securing and fastening of the anchor chain. The split can accept 8mm to 13mm chain depending on the size. The smaller unit has a 60mm by 60mm base and is 84mm high and can take chain size up to 10mm. The larger unit has a 85mm by 85mm base and is 115mm high and can take chain up to 13mm. Both sizes take 6mm fastening screws or bolts.
Brand:
Hunts Marine
SKU: RWB2247
