Hardware

This is the one and only ski hook on the market and has been around since boating began. Its a one piece stainless hook and bolt that passes through a chrome plated bronze base and is fitted with a wire safety lock to prevent accidental disconnection. The 5/16" (8mm) screwed shank measures 2 3/4" (70mm) from under the base.

This heavy duty transom ski ring is made from stainless steel and is through deck bolted. The thread length is 50mm and it is supplied with the mounting plate, washers and nuts. The distance between the two bolts is 54mm centre to centre.

This solid heavy duty cast stainless handle is made from 316 grade stainless steel. It's 145mm long and 43mm high and has 4 by 5mm countersunk fastening holes

Manufactured from high impact black plastic, this little guy has been around forever. It can be used as a large handle or a transom step. Its 160mm long by 42mm wide by 65mm deep.

Made from bright polished pressed aluminium its ideal for alloy boats. It comes complete with a removable retainer pin and a strong black nylon roller. The base is plain with no holes drilled so you can match any old holes. The base is 120mm by 57mm and the overall length is 187mm.

Made from solid chrome plated brass, this bow roller has been around forever and is extremely strong. It has a spring loaded retaining pin that can never completely fall out. The overall length is 145mm, max width is 75mm and the roller width is 25mm.

Available in 2 sizes, its made from heavy duty 304 grade pressed stainless steel and has a 50mm black nylon roller. The quick release captive pin retains your rope and chain on the roller and both come with 3 by 6mm c/sunk mounting holes. The small has a total length of 195mm and a base length and width of 100mm by 55mm. The large has a total length of 220mm and a base length and width of 125mm by 55mm.

Available in 2 sizes, its made from heavy duty 316 grade pressed stainless steel and has a 50mm black nylon roller. The quick release captive pin retains your rope and chain on the roller and both come with 3 by 6mm c/sunk mounting holes. The small has a total length of 335mm and a base length and width of 105mm by 55mm. The large has a total length of 360mm and a base length and width of 130mm by 55mm.

Replacement quick release pin kit to suit both stainless steel bow rollers above.