Accessories

This BEP on/off battery switch is high quality and small so it perfect for trailer boats where a nice neat installation is crucial. It's rated to 275 amp continuous, 455 amps intermittent and 1250 amps cranking. It suits applications up to 48volt. Dimensions are 69mm X 69mm X 75mm.

This BEP twin battery switch is high quality and small so it perfect for trailer boats where a nice neat installation is crucial. It's rated to 200 amp continuous, 300 amps intermittent and 1000 amps cranking. It suits applications up to 48volt. Dimensions are 69mm X 69mm X 75mm.

These BEP switch panels suits both 12volt and 24volt applications and have a built in 20mm power socket. All BEP Splashproof Switch Fuse Panels are supplied complete with a 28 piece label set. They are high quality and not a cheap copy. They are all pre-wired and have spade fuses already wired into the back of the units for easy installation. They come in both BLACK and WHITE in each size. The dimensions of the 3 and 5 gang panels are the same. Overall Size: 107mm x 95mm Cut Out Size: 87mm x 75mm Intrusion: 75mm. Labels Supplied: Anchor Light, Accessories, Aerator, Autopilot, Bait Tank Pump, Bilge Pumps, Blower, Cabin Lights, Cockpit Lights, DC Outlets, Deck Wash, Depth Sounder, Fridge, Freshwater Pump, GPS, Horn, Instruments, Inst. Lights, Navigation Lamps, Radar, Spare, Spot Light, Stereo, Stern Light, Trim Tabs, VHF, Winch & Wiper.

These BEP switch panels suits both 12volt and 24volt applications. All BEP Splashproof Switch Fuse Panels are supplied complete with a 28 piece label set. They are high quality and not a cheap copy. They are all pre-wired and have spade fuses already wired into the back of the units for easy installation. They come in both BLACK and WHITE in each size. The dimensions of the 4 and 6 gang panels are the same. Overall Size: 107mm x 95mm Cut Out Size: 87mm x 75mm Intrusion: 55mm. Labels Supplied: Anchor Light, Accessories, Aerator, Autopilot, Bait Tank Pump, Bilge Pumps, Blower, Cabin Lights, Cockpit Lights, DC Outlets, Deck Wash, Depth Sounder, Fridge, Freshwater Pump, GPS, Horn, Instruments, Inst. Lights, Navigation Lamps, Radar, Spare, Spot Light, Stereo, Stern Light, Trim Tabs, VHF, Winch & Wiper.

This BEP switch panel suits both 12volt and 24volt applications and has a built in USB dual charging socket. All BEP Splashproof Switch Fuse Panels are supplied complete with a 28 piece label set. They are high quality and not a cheap copy. They are all pre-wired and have spade fuses already wired into the back of the units for easy installation. Overall Size: 107mm x 95mm Cut Out Size: 87mm x 75mm Intrusion: 55mm. Labels Supplied: Anchor Light, Accessories, Aerator, Autopilot, Bait Tank Pump, Bilge Pumps, Blower, Cabin Lights, Cockpit Lights, DC Outlets, Deck Wash, Depth Sounder, Fridge, Freshwater Pump, GPS, Horn, Instruments, Inst. Lights, Navigation Lamps, Radar, Spare, Spot Light, Stereo, Stern Light, Trim Tabs, VHF, Winch & Wiper.

BEP Battery Distribution Cluster is a pre assembled module with solid links and application labels, based on the 701 Mini Battery Master Switch. BEP Battery Distribution Cluster provides for isolation of start battery and house batteries independently with the ability to emergency parallel supply from both. Ignition protected. Dimensions are 200mm high X 69mm wide X 75mm deep.

We use this one all the time in our Cruisecraft and Yellowfin boats. The Battery Management System makes twin battery charging easy! Pre-assembled module with solid links and application labels combining three 701 Mini Battery Master Switches with a 100 amp Voltage Sensitive Relay. It's easily connected to the existing wires, providing a fully automatic battery management system and provides for isolation of start and house batteries independently with the ability to emergency parallel supply from both. The VSR  (Voltage Sensitive Relay) automatically prioritises charging of the start battery. When the engine is first started the relay is open and remains open until the start battery has reached a preset 13.7 volt. At the rated Voltage, the relay closes providing charge to both batteries (start and house). When the Voltage drops below 12.8 volt (when the engine is stopped), the VSR disengages, separating the batteries. It eliminates possibility of draining the start battery and protects electronics powered by the house battery from harmful engine starting spikes. Dimensions are 140mm X 140mm wide X 75mm.

12v in line Rule bilge blower with either a 75mm or 100mm inlet and outlet. They have a sealed motor shaft for moisture protection and are very low amp draw.

75mm or 100mm concertina high flow bilge blower hose. Price is per meter when extended.

Solid brass battery terminals to suit all pole style batteries.

The brass push button horn switch is suitable for interior mounting only and is rated to 25 amps for both 12v and 24v applications. Hole diameter for mounting is half inch.

Another very common plug used in a lot of marine applications. It's surface mounted so all you have running through the dash or deck is a small hole for the wires. It screws together so will not come apart in any condition and also has a screw on cap for when not in use. Available with 2 or 4 Pins.

This deluxe rocker switch with LED light is rated to 20amps and can either be mounted on its own or as a replacement in an existing panel. Suitable for 12 or 24volt applications. Comes with sealing gasket and fastens using locking tabs fixed to switch. Hole cutout is approx 20mm X 35mm.

Suitable for interior and exterior fitment this surface mounted dual 12/24volt socket with rubber covers has a standard 20mm socket as well as a USB socket. Rated to 20amp at 12volt and 10amp at 24volt.

Again another popular product, this heavy duty battery switch will handle up to 300 amps and is designed for twin battery installations on larger trailer boats and cruisers.

Horizontal black aluminium bilge pump switch panel with built in fuse and LED indicator lights in the rocker switch. It has a 3 position switch for auto mode, off and manual on. Dimensions are 85mm X 50mm by 50mm required depth.

This is a popular medium duty battery switch designed for twin battery installations in smaller trailer boats. Rated up to 200 amps.

12volt plastic flush mounted socket with splashproof rubber lid. Requires a 27mm hole for mounting and suits all standard 20mm accessory plugs. Perfect for charging phones, spotlights and 12v air pumps for blowing up tubes and biscuits.

One of the most common battery switches on the market. All you do is turn the red key a quarter turn. Key pops out when turned off for security when your boat is unattended. Comes with a rubber boot for when not in use. Rated to 100amps continuous.

12volt plastic flush mounted socket with splashproof rubber lid. Requires a 27mm hole for mounting and suits all standard 20mm accessory plugs. Perfect for charging phones, spotlights and 12v air pumps for blowing up tubes and biscuits.

Waterproof push button horn switch with rubber boot suitable for both 12v and 24v applications

Screw on rubber boot designed for 2 and 3 position switches above that have a threaded collar.

These tin plated brass buss bars with insulated mounting bases come in 2 sizes. They both sit 15mm high and the 6 takeoff is 120mm long while the 12 take off is 120mm. The mounting holes are recessed to avoid accidental shorts. Both are supplied with the required amount of stainless screws and split washers to suit.

The Century BM12V Battery Monitor is the easiest way to keep track of your battery’s state of charge and your vehicles starting and charging systems. The BM12V can be used to monitor conventional 12 Volt lead acid batteries and has been designed to withstand the most demanding environments. Its suitable for bluetooth enabled iOS and Android smartphones and can monitor all flooded, AGM and Gel 12v batteries.