Products

Available in 2 sizes of 6ft and 8ft the lines have a 20cm loop and neoprene float at either end and an 8mm inner shock cord to act as the shock absorber. They have a breaking strain of 670kg. The 4ft version stretches to 5.5ft and the 6ft version stretches to 9ft. It's Ideal for docking and mooring as it is designed to absorb sudden movement at the wharf or or anchor. 

Convenient twin pack of quality black double braid nylon with soft eye spliced into one end. Simply pass the fender line through the eye of the fender and back through the spliced eye for secure attachment. Features shock absorbing qualities. They are sold as a pair and are either 10mm by 2mtrs, 8mm by 2mtrs and 6mm by 1.5mtrs.

Exactly the same principle as above except the float is an inflatable heavy duty orange PVC that can be deflated for easy storage. It inflates to approx 320mm diameter and the stainless ring splits apart so you can clip it on to your anchor rope. 

All four anchor kits are 4 prong and are supplied straight and you bend them yourself with a bit or pipe or in a vice. It's not hard to do. Available in 4 sizes they all come with 50mtrs of silver rope all in 8mm thickness, 2 gal shackles, stainless eye in the end of the rope and the correct amount of chain. The 4 kits are:
8mm pronged anchor with 2mtrs chain - suits 3m - 4m boat
8mm pronged anchor with 3mtrs chain - suits 3.5m - 4.5m boat
10mm pronged anchor with 2mtrs chain - suits 4.5m - 5m boat
10mm pronged anchor with 3mtrs chain - suits 5m - 5.5m boat

These rubber mooring springers are designed to reduce jarring and cushion your boats shock load. Simply weave your mooring rope or dock lines through all the holes in the spring making sure the rope enters and exits via the scalloped cut-outs on either end of the spring. They will extend the rope length approx 150mm - 200mm. Make sure you buy the right one for the correct size rope.

The most popular of all anchors. With a heavy duty hot galvanised finish they are suitable for mud or sand. The anchor size refers to the approximate weight in pounds (lb). Make sure you choose the right size for your boat.
4lb - Boats up to 3 mtrs
6lb - Boats up to 4 mtrs
8lb - Boats up to 5 mtrs
10lb - Boats up to 6 mtrs
13lb - Boats up to 7 mtrs

This is what we use for the safety gear packs for all of our boats. Available in 3 sizes they come with 50mtrs of rope in the correct size, 2 gal shackles, stainless eye in the end of the rope and the correct amount of chain.
6lb kit - 50m by 6mm rope and 2m by 6mm chain.
8lb kit - 50m by 8mm rope and 2m by 8mm chain.
10lb kit - 50m by 10mm rope and 4m by 8mm chain.

SARCA is the first Sand And Rock Combination Anchor that actually works. The Hoop on the rear of the anchor ensures that the Super SARCA rolls over in most situations, allowing the toe to be in its best possible position to penetrate the ocean floor and reducing dragging as the fluke digs in. They incorporate an automatic reset trip release that offers you the highest rate of recovery from rocks. When anchoring in and around bommies, reef or coral the Super SARCA has less chance of getting stuck and will create less damage to the environment. If snagged, you tie off the rope and as you drive over the anchor the shackle slides up the shaft to pull the anchor out backwards. Make sure you always use a stainless shackle though so it slides easy. Use the table in the picture to work out the correct size for your vessel.

The next in the range is the 1000. Everything in the main picture is supplied in the box. The 2nd picture is the dimensions of the complete winch. The last picture shows what length of chain and rope it comes with. Below if needed is the Hawse pipes, bow sprits, genuine Savwinch anchors and wiring loom kits. CLICK HERE for the full installation manual for all models.

The largest in the range is the 1500. Everything in the main picture is supplied in the box. The 2nd picture is the dimensions of the complete winch. The last picture shows what length of chain and rope it comes with. Below if needed is the Hawse pipes, bow sprits, genuine Savwinch anchors and wiring loom kits. CLICK HERE for the full installation manual for all models.

The Savwinch Signature Series (SS) is their premium range of Drum Winch and is what we fit on all our trailerboats. As we fit them inhouse, we genuinely know what we are talking about and are only a phone call away if advice is needed. They feature a complete stainless steel motor, designed locally and exclusively for Savwinch. Machined to fine tolerances and utilising O ring seals, the SS series motors are IP68 rated and are completely submersible without the use of sealants or glues. You no longer need to be concerned about water ingress or corrosion. The motors can be moved into 12 different positions to ensure that each Drum Winch can be installed on almost any vessel.

Once you select the correct size for your boat, the winch is generally mounted on the rear of the anchor locker, provided it is strong enough and reinforced with the backing plate on the inside of the boat. If you have an aluminium boat like a Quintrex with a roto moulded anchor well then just purchase the plate below and still mount the winch inside the anchor locker but bolt it to the plate upside down and bolt the plate across the top of the anchor well. They can also be mounted just on top of the deck. Check out all the pictures as one of them shows the different mounting options and what extra may be needed. The only one its doesn't show is when you mount the winch upside down to the custom plate below that is bolted across the top of the anchor well. (What we use on Quintrex and Stacer boats)

Everything in the main picture is supplied in the box. The 2nd picture is the dimensions of the complete winch. The last picture shows what length of chain and rope it comes with. Below if needed is the Hawse pipes, bow sprits, genuine Savwinch anchors and wiring loom kits. CLICK HERE for the full installation manual for all models.

The next in the range is the 880. Everything in the main picture is supplied in the box. The 2nd picture is the dimensions of the complete winch. The last picture shows what length of chain and rope it comes with. Below if needed is the Hawse pipes, bow sprits, genuine Savwinch anchors and wiring loom kits. CLICK HERE for the full installation manual for all models.

Significantly quieten your chain so that you don’t scare away the fish! Our Chain Guard Sock is exclusively manufactured for Savwinch. Made from a custom thick sleeving which reduces almost all of the noise from the chain going over the Bowsprit. The thick custom material stretches over both 6mm and 8mm chain which allows the chain to breathe, ensuring you don’t get any sand/mud/seaweed stuck in the sleeving. Available in 7mtr or 9mtr lengths.  

When you have an anchor well that is not strong enough to bolt the winch to, (like plastic Roto moulded wells on Quintrex and Stacer) then you fit this plate across the top and bolt the winch up to it from underneath. That way the winch is still hidden inside the anchor well. Works best with the 880 winch.

Slider anchors (also known as escape anchors) feature a full sliding ring along the shaft. The advantage of the full sliding action is that it allows you to drive over the top of your anchor, slide your chain down the shaft and pull it out when reefed or caught. Savwinch features the Delta Style design Anchor you’ve known to love. Whilst also having the excellent holding power of a traditional anchor with the added benefit of a Sliding ring. Use the chart below as a guide, if unsure then always go larger. You can get Galvanised and Stainless Steel in each size.

4kg    - Boats up to 4.5m
6kg    - Boats up to 5.5m
7.5kg - Boats up to 7m
9kg    - Boats up to 8m
16kg  - Boats up to 11m
20kg  - Boats up to 15m

The 316 Stainless Steel Savwinch Signature Bowsprit is designed to secure and house your anchor and suits almost all boats. This is our high end, premium Bowsprit which starts with a large piece of Stainless Steel that is folded, a second piece of Stainless Steel is then welded to the top, which is then polished our to create the perfect Bowsprit. The signature Bowsprit features 3 rollers, which allows for quick and easy anchor retrieval every time. If you look at the 1st picture you can see the 3 axle bolts along the side showing where the 3 rollers are. Dimensions are 78mm X 430mm.

If you don’t have an open Anchor Well and you don’t want to Deck Mount your Drum Winch you will require a Hawse Pipe. A Hawse Pipe gives a nice clean look and ensures the Winch is hidden away within the boat. Made from 316 stainless the small is great for boats under 7mtrs and suits almost all our trailer boats. the large is for boats over 7mtrs. The small has a base of 168mm X 100mm and an opening of 100mm X 48mm. The large has a base of 223mm X 100mm and an opening of 154mm X 48mm.

The Swivel Arm Bowsprit Small is a fixed 316 Stainless Steel Bowsprit perfect for any vessel up to 8m. Featuring a self launching design to ensure your anchor always drops. Universal mounting holes make this easy to install yourself with just a few bolts. If you’re looking for a self launching Bowsprit that not only looks great but performs flawlessly every time, you can’t go past the Swivel Arm Bowsprit. Dimensions are 78mm X 417mm.

The Savwinch Wiring Loom Kit includes twin sheath cable, heatshrink and required terminals. Featuring oversized cable to ensure that you don’t experience any voltage or performance issues. What length you choose will depend on not only the size of your boat but also where you batteries are positioned. 

Sea Anchors have a number of uses. From slowing a boats drift to keeping a vessels direction true in wind or tide. They are made of a strong pvc rip stop fabric with reinforced nylon straps and collapses right down flat for easy storage. Available in 3 sizes, (dimensions are of pvc section, L = Length and D = Diameter)
Small - boats up to 4.5m - 300mm L X 600mm D
Medium - boats up to 6m - 700mm L X 800mm D
Large - boats up to 7.5m - 1100mm L X 1070mm D
X Large - boats up to 9.0m - 1400mm L X 1350mm D

These 316 stainless anchor swivels come in two sizes and pull easily over any bow roller. The smaller unit does 6mm and 8mm chain and the larger one is for 10mm chain. Pins are removed with an allen key but remember to use some Loctite on the threads when assembling. Smaller unit is 84mm long and 28mm wide and has a max load of 2500kgs. The larger unit in 90mm long and 40mm wide but has a smaller max weight rating of 1350kgs.

Made from stainless steel, the oval Hawse hole is 160mm long by 115mm wide by 34mm high and has a throat diameter of 105mm by 52mm. The lid is permanently attached with a security chain and the cutouts in the lid and base fits into the anchor chain to hold the lid down.

Stand out form the rest and accentuate the bow of your boat with a polished cast 316 grade stainless steel plough anchor. It is also fitted with a retrieval eye for ease of removal if snagged. The anchor size refers to the approximate weight in pounds (lb). Make sure you choose the right size for your boat. CLICK ON THE NEXT PICTURE TO SEE ANCHOR DIMENSIONS. (Note: Sizes 48 and 60 are POA as not always available)
10lb - Boats up to 5 mtrs
15lb - Boats up to 7 mtrs
20lb - Boats up to 8 mtrs
27lb - Boats up to 9 mtrs
33lb - Boats up to 11 mtrs
48lb - Boats up to 13 mtrs
60lb - Boats up to 15 mtrs

Handy to have for a million applications. It's 3mm diameter 8 plait solid colour UV treated polypropylene venetian blind cord. Each roll is 100mtrs.