Products

Available in PORT and STARBOARD this 3 Way stainless steel rod holder fits into any 30 degree deck mount rod holder. Has a movable nylon tapered spacer for a secure fit and cross cut in the bottom to engage in any rod stop. (Note: The one on the left in the picture is of the STARBOARD rod holder as the straight rod holder is closest to your motor.)

Available in PORT and STARBOARD this 3 Way stainless steel rod holder with 3 Way Joint fits into any 30 degree deck mount rod holder. Has a movable nylon tapered spacer for a secure fit and cross cut in the bottom to engage in any rod stop. Made form 316 Stainless Steel.

RWB has developed a range of Livewell Bait tanks that are exclusive to RWB and represent some of the best equipped tanks in the market today. This kit includes a 30L or 40L tank and hatch lid. The pump and fittings are not included and can be purchased separately in the Pumps and Plumbing section or as the kit below. The tank is designed to mount under a casting or fishing deck or even under the gunwale. The hatch screws through the gunwale/deck directly into the tanks thickened top to secure its position. Dimensions of the 40L tank are LxWxH: 510 x 270 x 300mm and you will need 80mm of clearance below the tank to allow for access and connection of a drain hose. The 30L tank is the same high and depth and is 450mm wide. Total installation height of both is 380mm. The hatch cut-out size for both tanks is 295mm by 200mm and all fasteners are concealed under the hatch lid when closed.

This is the heavy duty 30Ltr tank above plus all the fittings and plumbing you will need as displayed in the 2nd picture. 2 by 1.6mtr sections of hose are also included and the only additional thing you will need is just some 12v wiring and switch or just wire it up to a spare switch panel that you already have in the boat. 

Horizontal, wall or overhead mounted, white polymer rod racks. They have 50mm holes to accept the rod butt and 19mm slots for rod tips. They are supplied with variable position mount brackets and mount screws. Racks are sold as a pair. Both have a depth of 81mm and a height of 65mm. The 4 rod rack is 385mm long and the 6 rod rack is 555mm.

This is a popular option and is found in many boats. It is made from white polypropylene and has a clear watertight locking hatch. Each draw also has a clear locking lid. Outer dimensions are 364mm X 183mm and the cutout is 321mm X 140mm and requires 150mm depth. The draws are 130mm X 150mm X 50mm.

This adjustable swivel rod holder pivots both left and right as well as up and down. Includes the side mounting base which fastens with 4 screws or bolts.

Available in 3 sizes of 3, 4.5 and 5.3 Liter, this is an economical metal bodied burley cage manufactured utilising steel mesh and frame with metal weighted base. Cage, lid and base are black epoxy coated to provide protection against the harsh marine environment. Diameter is 125mm and heights are 190mm, 225mm and 300mm respectively.

Manufactured from high grade, corrosion resistant polished marine stainless steel. They are heavy duty and sharpened to cut braid up to 1.8mm diameter.

Large heavy duty cast aluminium with large spew and removable steel die. Permanent mounting. Various dies and sausage ends available.

Heavy duty cast aluminium with large spew and removable steel die. Permanent mounting. Various dies and sausage ends available.

Heavy duty cast aluminium with mincer with large screw and removable steel die. Easy mount G-clamp system. Various dies and sausage ends available.

Cast lead downrigger weights with brass attachment points. Designed for use on all downriggers.

Soft, non-abrasive backing and Velcro enclosure allows for a secure, protective fit on all larger-bodied downriggers above Mini Troll.

Made from black powder coated aluminium, it will let you mount any of the Cannon downrigger range, (except Mini-Trol), into an existing rod holder. The pad is pre-drilled to accept all bases. They have a solid 13mm thick top mount pad which measures 127mm by 127mm and an extra heavy duty 6mm wall thickness support tube. Stainless steel mount fastening included. Tube diameter is 38mm and the two shaft lengths are either 9 inch or 12 inch.

The Universal clip (Black One 394404) is the most popular one and has two adjustment points which enable the universal release clip to be precisely adjusted to release at 0.9kg (2lb) and 9.97kg (22lb), making this a versatile clip, whether you are trolling deep diving hard bodies or live baiting. The Offshore Saltwater clip (Red One 394402) is corrosion-resistant and its high-tension spring is designed for heavier saltwater lines. Troll at high speeds in deep water with its heavy duty release. Anti-fouling pins prevent the line from snagging behind the gripper pads. 

Replacement stainless steel wire to suit Cannon Downriggers. It has a 68kg break load and comes in the 3 lengths of 45M, 60M and 120M.

These are our simple to use electric work horses featuring extendable booms and swivel bases. They are perfectly suited to all the saltwater species you can target – from tuna to mackerel to kingies – you will get to the fish. 

Features
• Auto-Up feature retrieves the weight at the push of a button
• Dual axis adjustable rod holder
• IP68 waterproof power cord
• Removable side plate for easy spool access
• Includes mounting base and low-profile swivel base
• Three-digit depth counter
• Integrated ball storage hook
• 20lb ball weight weight capacity
• Includes line release and 76m of 68kg stainless steel cable
• Corrosion-resistant construction

Both Magnum 10 downriggers share the same features except the TS has a stainless steel spool and a white housing.

The Mag 5 opens the door to our Electric Downrigger family. If you are fishing alone there is no bigger advantage to an electric retrieval of your bomb when you hook a fish. Just flick the switch and it will bring your bomb up so you can get back to fishing. The Mag 5 has a fixed spool length and does not include the swivel base of the Magnum 10 STX models.

Features
• Auto-Up feature retrieves the weight at the push of a button
• Dual axis adjustable rod holder
• IP68 waterproof power cord
• Removable side plate for easy spool access
• Three-digit depth counter
• Includes mounting base
• Integrated ball storage hook
• 20lb ball weight capacity
• Includes line release and 76m of 68kg stainless steel cable
• Corrosion-resistant construction

With its stainless steel spool and white housing, the Optimum TS downrigger wirelessly networks together giving you control of all of your downriggers with the push of a button. They connect with your Humminbird fish finder and your mobile device for total control and to display trolling data. With the One-Boat Network, your advanced fishing gear does more than work together. It starts talking to each other wirelessly, to help you find, stay on and land more fish. The full-colour 4” display shows critical trolling data right on your downrigger, taking the guess work out of your trolling presentation.

The Cannon mobile app connects to your Optimum TS downriggers, putting you in total control. Set, cycle or raise weights, access Fish Hawk sensor data…it’s all there at your fingertips. Every Optimum TS downrigger integrates wirelessly with the Fish Hawk X4D to give you the info you need to troll successfully. You’ll know more than surface water temp and speed. Your Optimum TS display will also show you the true depth, trolling speed and temperature at the weight. Through the One-Boat Network, you can also access this data through your mobile device and Humminbird fish finder.

Features
• Auto Up allows you to retrieve weights simultaneously
• across networked downriggers with the push of a button
• Bottom Tracking keeps your bait presentation at a
• precise distance off of the bottom
• Depth Cycling – Cycle your bait within a set depth range
• Positive Ion Control
• Waterline Zero
• Telescopic boom extends from 24” to 53”
• 250 feet-per-minute retrieval speed
• 20-lb weight capacity

This base is available for a second mount or replacement and suits all electric and manual downriggers except Lake Troll and Mini Troll. 

The Easi-Troll is one of our most popular downriggers suited to smaller saltwater applications and most Australian and New Zealand freshwater fishing. It is the first in the line to feature the new axis rod holder and universal mounting base that all the larger models use.

Features
• 1.51 retrieval speed
• One-hand clutch deploy for simple, precise bait positioning
• Easy-access universal mounting base
• Single axis rod holder – fully adjustable front to back
• 61cm stainless steel boom
• Includes line release
• 12lb ball weight capacity
• Enclosed boom end pulley prevents line jumping
• Ergonomic crank handle
• Three-digit depth counter
• Pre-spooled with 46m of 68kg stainless steel cable

The Uni-Troll 10 range are suited to all the salt and freshwater fishing you can throw at them from mackerel to kingies and all the barra and cod you can get a lure to. The Uni-Troll 10 downriggers share the same Features except the TS TORN below has a stainless steel spool.

Features
• 21 retrieval speed
• One-hand clutch deploy for simple, precise bait positioning
• Enclosed boom end pulley prevents line jumping
• Easy-access universal mounting base 
• Dual axis rod holder – fully adjustable in all directions
• Stainless steel telescopic boom extends from 61cm to 135cm
• Includes mounting base and low-profile swivel base
• 20lb ball weight capacity
• Ergonomic crank handle
• Integrated ball storage hook
• Three-digit depth counter
• Pre-spooled with 61m of 68kg stainless steel cable and includes a line release