Products

Available in 2 sizes, its made from heavy duty 304 grade pressed stainless steel and has a 50mm black nylon roller. The quick release captive pin retains your rope and chain on the roller and both come with 3 by 6mm c/sunk mounting holes. The small has a total length of 195mm and a base length and width of 100mm by 55mm. The large has a total length of 220mm and a base length and width of 125mm by 55mm.

155mm long, the low profile heavy duty cast stainless steel fold away cleat is now used on many brands of boats we sell including CruiseCraft. It simply folds down when not in use to create an extremely smooth non-obstructing deck fitting with low profile appearance. Indented finger lift for easy retrieval, simply push to fold away. Height when folded down is just 10mm.

This is the one and only ski hook on the market and has been around since boating began. Its a one piece stainless hook and bolt that passes through a chrome plated bronze base and is fitted with a wire safety lock to prevent accidental disconnection. The 5/16" (8mm) screwed shank measures 2 3/4" (70mm) from under the base.

This heavy duty transom ski ring is made from stainless steel and is through deck bolted. The thread length is 50mm and it is supplied with the mounting plate, washers and nuts. The distance between the two bolts is 54mm centre to centre.

Stainless Steel Battery tie down. Maximum battery height 215mm and minimum height 160mm, maximum width 190mm. 4mm countersunk mount screws.

Made from cast 316 grade stainless steel, the pad eye folds down after use. 2 piece construction with a cast base with 3 x countersunk fastening holes and cast folding dee ring. Click on the pictures for further dimensions.

Made from 304 stainless steel they have a welded eye and 4 by countersunk holes drilled. Click on the 2nd picture to see the dimensions of each one. Note: the SWL is approx 25% of ultimate breaking load.

Sold as a pair (Port and Starboard), These fairleads come in 2 sizes and are made of hollow cast 316 stainless.

Made from 304 stainless steel they have a 2 piece body and dee ring that folds down and is only 14mm high when not in use. The overall dimensions of both are 65mm by 50mm and you can have either a 6mm by 40mm dee ring or a 8mm by 40mm dee ring.

These telescopic folding 316 stainless ladders are what is used on a lot of the Quintrex boats and are designed to bolt on to a swim platform. The 2 rung is 290mm wide, 335mm when retracted and 600mm when extended. The 3 rung is 295mm wide, 370mm when retracted and 850mm when extended. They come with a velco strap to hold the steps together when retracted.

Made from pressed 304 grade stainless steel with cam action lever. The length adjusts by turning the threaded bolt and it has an integral eye that can be padlocked for security. Click on the pictures for further dimensions.

Made from polished 304 grade pressed stainless steel, all 4 stainless louvre vents are pre-drilled for 4mm fastenings. Dimensions of all 4 are in the main picture.

Made from stainless steel, the oval Hawse hole is 160mm long by 115mm wide by 34mm high and has a throat diameter of 105mm by 52mm. The lid is permanently attached with a security chain and the cutouts in the lid and base fits into the anchor chain to hold the lid down.

Made from 304 stainless steel they have a welded eye and welded ring and 4 by countersunk holes drilled. Click on the 2nd picture to see the dimensions of each one. Note: the SWL is approx 25% of ultimate breaking load.

304 grade stainless U bolts with crimped shaft for all transom mount applications. Comes with cross plate, 2 washers and 2 nuts. They are available in 5 sizes: Click on Product Name above to see full details of fitting and sizing to suit your boat.

White plastic flush mounted heavy duty glove/storage box with waterproof lid. Outer lid dimensions are 245mm wide and 120mm high and the depth of the box is 165mm.

Manufactured from ASA plastic for strength and UV resistance, they are ideal for ventilation of the cabin, galley or bathroom areas. White satin finish exterior with smoked (tinted) acrylic lens, the hatch comes with a trim ring, neoprene gasket seal, one stay with stainless steel shaft and one opening handle. Made in Italy, its low profile at only 22mm above deck. The outside dimensions are 448mm by 268mm and the inside opening size is 376mm by 196mm.

Hand polished marine grade 316 stainless steel hawse pipe is perfect for cuddy cabs, centre consoles or bow riders with very small anchor wells. The rope and chain simply comes straight up through the deck and out to the bow roller. Opening Dia:76mm H: 140mm D: 140mm

This is another very common shower head on/off nozzle. It has a round shower rose that is adjustable for the required water flow. Fits the hoses and housings below.

This is a very common shower head on/off nozzle and is used on a lot of trailer boats including the Whittley models we sell. Fits the hoses and housings below.

The adaptor plate kits are available in the 300mm and 450mm widths. They allow boaters to easily upgrade to Zipwake from another similarly sized interceptor system. The plates streamline hull preparations to upgrade to Zipwake Series S, fitting perfectly to the existing transom screw hole pattern and sealing previous holes for thru hull fittings. An Adaptor kit includes two adaptor plates, 2 O-rings, screws and an installation guide.

Made in Sweden, Zipwake is the world's first Dynamic Trim Control System which incorporates a state of the art series of durable, fast acting interceptors, eliminating the well known trim problems of planing and semi planing hulls. The S Series suits boats between 17 to 50 feet. The system is fully automatic and significantly enhances performance, fuel economy, comfort and safety when accelerating and cornering. Thye have a built in GPS, 3D Gyro and 3D Accelerometer. 

A kit box includes all the parts needed to install a dynamic trim control system with one pair of fast acting interceptors. There are 4 different kit boxes, one for each length of interceptor model. The 4 different kits are the different interceptor lengths of 300mm, 450mm, 600mm and 750mm. The two most common kits by far are the 300mm and the 450mm and are the ones used on all our trailerboats including the large Yellowfin plate boats and the CruiseCrafts.

Each kit contains a pair on interceptors with 3mtrs cables on each, the control panel with a 7mtr cable and the distribution unit with a 4 mtr power cable. Dimensions of the control panel and the interceptors are in the pictures.