Products

The SeaFlo 800GPH pump is a powerful low profile pump with a straight intake configuration. It's designed to suit small confined bilge and tank areas and features ignition protected wiring plus push button cartridge removal system. Supplied complete with 3/4 inch straight and 90 degree elbow tails. 12 volt, 4Amp water cooled motor.

This Seaflow Manual and Automatic 750GPH or 1100GPH pump comes in the exact same sized housing so just select what capacity you are after when ordering. They are a direct replacement for Attwood pumps of the same sized base as well and they just clip on and off to the existing base. These 2 are fully automatic as well as manual override so when installing they have 3 wires (2 positive and 1 negative) so you just run one of the power wires to a switch on the dash and the other directly to your battery as that way when the battery isolation switch is in the off position the auto part of the pump will always work. the 750 GPH model has an output hose size ID of 19mm or 3/4 and the 1100 GPH suits a 29mm or 1 1/8 hose. Height of both pumps is 103mm.

This SEAFLO Narrow, Low profile bilge pump fits deep down in small/awkward bilge spaces where other pumps won't fit. Compact, Horizontal or vertical mounting, with 360 Degree Discharge for easy remove and replace and leaves the bilge almost dry. Comes with 3 output sizes of 3/4" (19mm) and 1" (25mm) straight Hose barbs and a 1 1/8" (29mm) 90 degree elbow. It automatically turns on and off when the water rises up and down. Output capacity is 1100 GPH or 4164 LPH. Height of pump is 85mm.

Great for large cockpits, dockside installation and even home cleaning useThe Seaflow Hosecoil is designed to facilitate easy, neat, safe storage. It consists of UV-protected 20 foot (6.5 m) Coiled 5/16 O.D Hose, soft contoured rubber grip spray nozzle with adjustable tip and all quick connect fittings.

Available in 2 models, the SeaFlo portable compact 12V inline pump has a water cooled motor and can either be used as an inline pump or with the removable strainer on one end. Available in either 200 or 280 gallons per hour they are ideal for fresh or salt water use the 200GPH model has a 38mm diameter body with 12mm spigots and the 280GPH model has a 42mm diameter body also with 12mm spigots.

This Seaflow float switch suits both 12V and 24V pumps up to 20 Amps (2000 GPH). Just wire it inline in the positive wire leading to the pump and it turns on when the water level reaches 2" and turns off when it reaches 3/4". SEAFLO float switches are resistant to corrosion and salt, and are highly durable. 

If you cannot screw down the removable blue plastic strainer base then you can buy this bracket so you can side mount the new Rule-Mate Gen 2 pumps. One bracket suits all three sizes.

This is the inline galley pump used in almost all of the Whittley boats. It is available in the 2 sizes of 12LPM and 16LPM and is a perfect little pump for sinks and low volume fresh water transom showers. It is not a self priming pump so needs to be mounted at tank level so there is always water in the line. Both models are supplied with outlet adaptors so they will suit either 10mm ID or 13mm ID hose.