Products

Black tapered wedge to suit left and right windscreen locking handles.

Bow Roller assembly to suit Quintrex and Stacer Trailers with 100mm gap. Supplied with bolt, washers and nut as well.

Bow Roller assembly to suit Quintrex and Stacer Trailers with 75mm gap. Supplied with bolt, washers and nut as well.

This is the inspection port found on the rear of all Yellowfin and larger Quintrex boats. The thread will match up so if you loose your lid just buy this and then you don't need to replace the surround. O-ring seal for maximum protection.

There is no original Quintrex cockpit table as they just come from 3rd party suppliers but this is the most common one and the one we use in all our other boats. The tables are made from UV stabilised high impact plastic and the pedestals are silver anodised aluminium. The thread-lock pedestal system allows the table and pedestal pole to be quickly and easily removed from the base for storage. The thread lock also includes a ratchet lock mechanism for very steady and secure mounting. This is a really easy table to fit as the base only needs to be screwed down to the floor and you don't need to recess a big hole in the middle. The base only sits up about 15mm and is tapered on the sides so you cant kick your feet on it either. The base diameter is 180mm, the pole is 680mm high and the table top is 760mm long by 460mm wide.

Same pole and base as above except the table is rectangular and has 4 inbuilt cup holders. Table dimensions are the same at 760mm by 460mm.

This is the screw on stainless strainer that fits the threaded tube of the live bait tank pickups. 

Genuine Quintrex Silver Blade Hull decal. Dimensions are approx 20cm by 5cm (At the widest point). Price is for one only.

Referred to as 'Telwater White', this is the genuine Quintrex touch up paint in a small tin (Approx 100ml). Suits 2014 models to current. When you get this paint it can sometimes be a bit thick to apply so when we use it in the workshop we thin it down a bit with some paint thinners. It's good for doing stone ships and small scratches.

This is the Trem black plastic waterproof live bait tank hatch assembly for your Yellowfin. Dimensions of the lid are 270mm by 375mm and it comes with the inner cut out section as well as per the picture. Dimensions of the cut out are approx 295mm by 195mm.

This is the centre dress cap that clip into the black alloy mag wheels. Approx diameter of where it clips in is 65mm. Note: its common for these to fall out on long trips so we recommend gluing them in.