X
350mm Steering Wheel
$55.00
Budget, but quality, 3 Spoke 350mm plastic steering wheel with cast alloy 3/4" morse taper. Will suit any helm that has a tapered shaft.
Brand:
Hunts Marine
SKU: 93850
X
Base Mounted Steering Pulley
$34.95
This base mounted steering pulley has a stainless steel bracket with a polyethylene wheel and can handle up to 5mm diameter wire. Note to be used for high performance or racing applications.
Brand:
Hunts Marine
SKU: RF2420
X
Baystar Side Mount Steering Kit up to 150hp Part # 291570
$1,300.00
The Baystar Side Mount steering kit is one of the simplest kits on the market and suits almost any outboard that has a threaded tilt tube. You just need to make sure that you have the side clearance of approx 500mm for the Ram to fit without fouling on the outboard motor well or transom. It is rated up to 150hp single engine only and has an anodised alloy cylinder for reduced friction and longer seal life, chromed stainless steel push rod and patented non feedback steering lock valves. It is 5.9 turns lock to lock. Not suitable for racing or high performance engines.
Kits Include:
• BayStar helm pump standard 291490
• BayStar side mount cylinder 291072
• 15m 292997 semi rigid nylon hose kit (You trim it to correct length)
• 4 x 293610 nut and olive kit
• 1 x 291898 filler kit
• 2 x 291902 1 litre SeaStar Solutions® oil
Kits Include:
• BayStar helm pump standard 291490
• BayStar side mount cylinder 291072
• 15m 292997 semi rigid nylon hose kit (You trim it to correct length)
• 4 x 293610 nut and olive kit
• 1 x 291898 filler kit
• 2 x 291902 1 litre SeaStar Solutions® oil
Brand:
Hunts Marine
SKU:
X
Blue Plastic Coated Steering and Brake Cable
$4.00
3.5mm galvanised blue plastic coated steering cable for older style cable and pulley steering systems or for brake cable on all trailers with mechanical brakes. Price is per meter. Not to be used for high performance or racing applications.
Brand:
Hunts Marine
SKU: GALPVC3.0
X
Chromed Steering Cable Clamp
$8.50
Chromed 1/2 inch UNF steering cable clamp to suit 3.5mm blue plastic coated cable. Note: It's best to strip the plastic coating from the cable where the clamp is to be used.
Brand:
Hunts Marine
SKU: RF2415
X
Filler/Bleeder hose to suit 946ml bottle
$19.95
Whilst it may seem a little expensive, this filler/bleeder hose makes your life a whole lot easier when filling and/or bleeding your hydraulic steering system. Its what come standard in the full kits sold just below. It screws on to the top of the bottle and also screws into the filler hole on the helm. The hose is approx 500mm long.
Brand:
Hunts Marine
SKU: C291898
X
Hydraulic Steering Oil 946ml
$35.00
This hydraulic steering fluid is made by Baystar/Seastar but can be used in any sort of outboard hydraulic steering system. Buy a bottle today and keep as a spare on the boat or back in the garage.
Brand:
Hunts Marine
SKU: 291902
X
Leader 367mm 6 Spoke Steering Wheel
$230.00
Combines both sports and traditional styling. Features six tubular stainless steel spokes and a solid simulated black or grey leather grip. It's 367mm diameter and the offset is 69mm to the back of the grip from the dash and 97mm to the front of the grip. The cast alloy hub will suit any 3/4 inch tapered shaft.
Brand:
Hunts Marine
SKU: 271212
X
Manta 350mm Steering Wheel
$179.00
Manta three spoke aluminium steering wheel made in Italy. It's 350mm diameter and the offset is 70mm to the back of the grip from the dash and 101mm to the front of the grip. It has a black leather look polyurethane grip with brushed black anodised aluminium spokes and a cast alloy hub to suit any 3/4 inch tapered shaft.
Brand:
Hunts Marine
SKU:
X
Multiflex 280mm Steering Wheel
$65.00
Quality, economical, modern styled 3 spoke 280mm (11 inch) sports wheel ideal for smaller powerboats. Plastic wheel and spokes with an aluminium hub with tapered core.
Brand:
Hunts Marine
SKU: RWB7726
X
Multiflex 340mm Steering Wheel - 3 Colours
$59.95
One of the most popular steering wheels for smaller power boats. 3 spoke 340mm (13 1/2 inch) diameter with a soft grip wheel which is easy to hold and use. Has an aluminium hub with tapered bore. Available in Black, White or Grey.
Brand:
Hunts Marine
SKU: RWB7723
X
Outboard Hydraulic Steering Lock
$34.95
A simple but great product that stops your outboard, fitted with hydraulic steering, flopping from side to side when on the road. It's made from heavy duty nylon that wont scratch anything and can be cut down to suit if needed. It fits 15mm and 19mm shafts which is pretty much any brand of hydraulic steering. Just remember to take them out when you put your boat in the water.
Brand:
Hunts Marine
SKU: 84284
X
Plastic Steering Cable Clamp - Pair
$35.00
Sold as a pair, Nylon moulded clamp block to suit light duty Teleflex Morse steering cables. It's used to secure the cable at the output end and is bolted together with 4 bolts (not supplied) Dimensions of each half is roughly 50mm by 40mm by 10mm.Â
Brand:
Hunts Marine
SKU: 726670
X
Quick Connect Steering Kits - 3 Turn
$320.00
Manufactured by Seastar, these Quick Connect kits are a quality product and are used all the time in our workshops. Trying to match up and replace old steering cables from brands that are no longer available is a real hassle so with these kits it is quicker, cheaper and easier to just replace the whole lot. All you do is reuse your steering wheel. Like any mechanical steering system they are designed for all engines up to and including V4 models. They are 3 turn lock to lock and everything in the picture is supplied. All you need to do is choose your cable length. Note: Most older cables have the length stamped in the outer plastic cover towarads the helm end of the cable. When measuring your old cable you measure from the large alloy nut that screws on to the engine tilt tube to where the inner cable starts to come out of the outer cable plus 450mm.
Features:
• Compact rotary helm occupies minimal space behind dash
• Cable will fit through minimum channel of 23mm
• Standard ¾" tapered steering wheel shaft
• Stainless steel cable output end minimises corrosion
• Meets ABYC, NMMA and BIA requirements
Features:
• Compact rotary helm occupies minimal space behind dash
• Cable will fit through minimum channel of 23mm
• Standard ¾" tapered steering wheel shaft
• Stainless steel cable output end minimises corrosion
• Meets ABYC, NMMA and BIA requirements
Brand:
Hunts Marine
SKU:
X
Replacement Quick Connect Steering Cables
$180.00
Replacement push in quick connect steering cables - no tools required to connect cable to helm. Length is measured from helm connection to large alloy nut that screws on to steering tube at motor end plus 450mm.
Brand:
Hunts Marine
SKU:
X
Santorini 350mm Steering Wheel
$260.00
Santorini 350mm steering wheel with brushed aluminium spokea and a polyurethane grip with inserts. It's 350mm diameter and the offset is 55mm to the back of the grip from the dash and 85mm to the front of the grip. It is supplied with the hub which suits any 3/4 inch tapered shaft and then is adjustable via the 6 hex head bolts so it can be rotated for easy wheel alignment.
Brand:
Hunts Marine
SKU: 83803
X
Seastar Premium Soft Hose Front Mount Steering Kit up to 300hp Part # 291601
$1,799.00
YES THIS IS THE FULL DELUXE KIT WITH FLEXABLE HOSES AND BULKHEAD BEND RESTRICTORS FOR $1799. IT IS THE COMMON HC5345-3 KIT AND OTHERS ARE AVAILABLE FOR AN ADDITIONAL PRICE. SEE SELECTION GUIDE IN 2ND PICTURE. The Seastar Front Mount kit is one of the best quality kits on the market and is what we use on all of our boats. It is designed for single engine installations up to 300hp (Please contact us if you are doing a twin install as we can help but need to know further details). It comes with a 50ft roll of SOFT hose with two reusable fittings. All you do it trim it to the correct length and apply the fittings. There are 5 variants available and YOU MUST CLICK ON THE PRODUCT NAME OR PICTURE TO MAKE SURE YOU PURCHASE THE CORRECT KIT.
Kits Include:
1 x Seastar Front mount cylinder
1 x 291502 Front mount helm
1 x 293050Â 50 ft hose
2 x 297332 Reusable hose fittings
2 x 291902 1 litre SeaStar hydraulic oil
2 x 293001 rubber boot
2 x 293628 Bulkhead bend restrictors
Kits Include:
1 x Seastar Front mount cylinder
1 x 291502 Front mount helm
1 x 293050Â 50 ft hose
2 x 297332 Reusable hose fittings
2 x 291902 1 litre SeaStar hydraulic oil
2 x 293001 rubber boot
2 x 293628 Bulkhead bend restrictors
Brand:
Hunts Marine
SKU:
X
Side Mounted Steering Pulley
$34.95
This side mounted steering pulley has a stainless steel bracket with a polyethylene wheel and can handle up to 5mm diameter wire. Note to be used for high performance or racing applications.
Brand:
Hunts Marine
SKU: RF2419
X
Single Swivel Steering Pulley
$28.95
This swivel mounted steering pulley has a stainless steel bracket with a polyethylene wheel and can handle up to 5mm diameter wire. Note to be used for high performance or racing applications.
Brand:
Hunts Marine
SKU: RF154
X
Stainless Steel Five Spoke Steering Wheel - 2 Sizes
$159.95
All stainless construction, tubular spokes and finger grip detents. Fitted standard with a swivel knob for easy, fast wheel turning. It's available in 340mm or 393mm diameter and the offset is 60mm to the back of the grip from the dash and 90mm to the front of the grip for the 340mm and 69mm and 96mm for the 393mm. The cast alloy hub will suit any 3/4 inch tapered shaft.
Brand:
Hunts Marine
SKU: W670
X
Stainless Steel Five Spoke Steering Wheel - 4 Sizes
$119.00
Top quality dished stainless steel wheel with a screwed and welded hub. It's available in 387mm, 457mm, 510mm and 557mm diameter and the offset is 77mm to the back of the grip from the dash and 104mm to the front of the grip for the 387mm, 93mm and 118mm for the 457mm, 45mm and 68mm for the 510mm and 112mm and 137mm for the 557mm. The cast alloy hub will suit any 3/4 inch tapered shaft.
Brand:
Hunts Marine
SKU:
X
Stainless Steel Three Spoke Steering Wheel - 2 Sizes
$265.00
All stainless construction, solid stainless spokes and finger grip detents. Fitted standard with a swivel knob for easy, fast wheel turning. It's available in 340mm or 393mm diameter and the offset is 60mm to the back of the grip from the dash and 90mm to the front of the grip for the 340mm and 69mm and 96mm for the 393mm. The cast alloy hub will suit any 3/4 inch tapered shaft.
Brand:
Hunts Marine
SKU: 62098
X
Steering Pulley Spring
$19.95
This is the tension spring that is used on older style cable and pulley steering systems.
Brand:
Hunts Marine
SKU: 166662
X
Steering Wheel Speed Control Knob - 2 Styles
$34.95
Available as either a clamp on or bolt on version, made from 316 grade stainless steel, these steering swivel can be used on both hydraulic and normal mechanical steering systems and alloys for faster and easier steering control at the wheel. They fit steering wheel rim size 20mm to 25mm (3/4 to 1 inch) diameter and the swivel protrudes approx 50mm from the wheel.
Brand:
Hunts Marine
SKU: 62124
