Electronics

The 165T-TM54 is a multi-beam transducer for the DFF3D that affords a 120 degree port-starboard view of the underwater world. A built-in motion sensor stabilizes the display to give clear and stable images. Standard Features are Transom mount with stainless steel kick-up bracket, DFF3D operating frequency: 165 kHz, 2 x 10M Cables: Bare ended cable for DFF3D sonar and 7 pin connector for the motion. Also includes built-in motion sensor and built in temp sensor.

The DFF-3D is an innovative tool for efficient fish location and seabed profile surveying, utilizing new multi beam technology. Highly detailed images are derived from the combination of an advanced signal processing system and an amazingly compact multi beam transducer. With DFF-3D, you can turn your NavNet TZtouch or TZtouch3 MFD into a multi-beam sonar that can see 120° Port to Starboard, allowing you to see the depth and direction Fish schools are moving, while displaying the seabed condition in real time. Built-in motion sensor stabilises the display, giving clearer and more stable images even in rough conditions. The basic detection range is 5m-1200m (depending on transducer selection and head unit selection). Sidebar detection range is up to 200 m (over 650 feet) in a 120-degree swath port and starboard direction. Deep water, main beam penetration directly under the boat is approx. 300 m (over 980 feet). Modes include: Triple/ Single Beam Sounder, Side Scan, Cross Section and 3D Sounder History. For the full Furuno DFF-3D brochure click here.

The GP-1871F (7") and GP-1971F (9") are new to the Furuno range and are developed from the NavNet TZtouch2, featuring slide-out menus containing all the tools and data you need to be in total control. They are full touch screen edge with edge seamless glass styling and by using the friendly rich C-MAP 4D charts, the GP-1871F and 1971F delivers highly precise data that features plenty of useful information such as relief vectors, tidal streams and marine plans, considerably enhancing your navigational awareness. Both units can also be connected to the 1st watch wireless radar giving your chart plotter a major upgrade in accuracy and safety. (radar sold separately). Some of the main features of the units are 72 channel GPS, 30,000 waypoint storage with 1000 planned routes, 300, 600 or 1kW transducer options, standard 50/200kHz or optional CHIRP 40 to 225kHz. Modes include TrueEcho Chirp, RezBoost, Accu-Fish, Bottom Discrimination, Auro Gain, Manual Gain, A0Scope, Marker Zoom, Bottom Zoom and Bottom lock. For the full Furuno GP1871F/1971F brochure click here.

The Furuno Navnet TZT3 Touch 16 has all the same specifications and features as the TZT3 12 above however it comes in a 15.6″ wide screen. For the full Furuno Navnet TZT3 brochure click here.

The Furuno 82B-35R Transducer with wide bandwidth frequency is designed to be used with the DI-FF AMP. With 2KW of power and 3 different beam angles between 7.7 and 12.5 degrees depending on the frequency nothing will come close for true deep water work. Can be mounted in hull or on the transom. Dimensions are 130mm wide and 55mm high.