Minn Kota electric boat motors

Designed to meet the increased stress created by high thrust motors and long shaft lengths. Constructed of marine grade nylon and with a black painted stainless steel quick release pin to resist rust, corrosion and discolouration. Locking handle can be secured with a padlock (not included) for additional security. 

Replacement pin to suit the heavy duty quick release bracket above.

Designed to suit the new model larger QUEST motors, it's larger than the two existing brackets and is made from a High-yield composite construction which is super strong and impervious to corrosion.  It's specifically designed for higher thrust motors and longer shaft lengths. The Low-profile design leaves the deck clear when the motor is removed. Locking handle with stainless steel pins can be secured with padlock (padlock not included). Available in Black or White.

This heavy duty alloy plate is designed to be used to either help strengthen the deck of a boat for fitting the new Quest engines or it can be bolted on to where a previous Minn Kota was fitted and then the new Quest is fitted to the plate. Designed for Saltwater and measuring 380mm by 245mm and12mm thick, its made from black anodised aluminium plate and provides additional strength, stability and versatility for mounting the Minn Kota QUEST series Riptide Instinct, Ulterra, Terrova, and Riptide Terrova trolling motors. It has multiple mounting hole patterns for super flexible installation and includes all the stainless hardware that you are likely to need. Can be used with the QUEST and Heavy Duty Quick release mounting brackets as well.

The Minn Kota Stabiliser is designed to reduce bounce on bow-mount trolling motors. It's equipped with a low profile base that allows the stabiliser to be easily folded down or removed when not in use. The pole can be cut down to suit the required height and it suits all RipTide, Ulterra, Terrova and PowerDrive bow mount engines.

This is the genuine Minn Kota replacement strap for the head stabiliser above. 

The RAM tough claw with round base consists of the small Tough-Claw base, double socket arm and round 6cm base adapter. The Tough-Claw can be clamped on rails from 0.625" - 1.5" outer diameter and the overall maximum height from the bottom of round base (deck of boat) to the Minn Kota shaft is approx 25cm. The round base adapter contains the industry standard universal hole pattern, which will connect to a large variety of RAM Mount and third party cradles or just screw it straight down to a flat surface. The mount is designed with a RAM 1.5" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm thus allowing for almost infinite adjustment. Suits all RipTide, Ulterra, Terrova and PowerDrive bow mount engines.

The Railblaza Trolling Support Motor Kit provides a secure support for trolling motor shafts while travelling. The fixed extender gives you the correct height off the deck and the G-Hold gives tight retention for the trolling motor shaft. The support can be removed from the StarPort when not used, clearing the deck for fishing. Other mounts are also available if the StarPort is not suitable for the application. The height from the deck of the boat to the middle of the bow mount electric engine shaft is approx 18cm. Suits all RipTide, Ulterra, Terrova and PowerDrive bow mount engines. Note: The top can be twisted and then locked to line up correctly with the shaft.

The Railblaza adjustable height stabiliser can be offset inboard or outboard to suit the alignment of your Trolling motor shaft. It is height adjustable in almost any angle and the flexible strap holds the shaft captive to avoid vibration on-road or on water. Max height from the deck of boat to the centre of the electric engine shaft is approx 31cm. It can be removed to create a clear deck when Trolling motor is in use and will fit any StarPort mount to suit your application (ordered separately) Suits all RipTide, Ulterra, Terrova and PowerDrive bow mount engines. Note: The top can be twisted and then locked to line up correctly with the shaft.

The Railblaza StarPort deck mount base is available in either black or white and suits the stabiliser above. It can be used with or without the mounting color and is supplied with stainless steel mounting bolts and screws so you can just use what suits best.

The Railblaza RailMount is a practical and simple-to-use mount, allowing the easy attachment of Railblaza accessories, and many other accessories. The RailMount simply fits around any rail and screws together for a firm fit. There is no need to drill holes so it can easily moved to a different spots if necessary. The RailMount 19-25 suits rails 19 to 25mm and the 32-41 suits the larger 32 to 41 mm rails. All RailMounts come complete with adapters, rubber grips, self-adhesive grip tape and the necessary stainless steel mounting screws.

There are Four main Minn Kota corded foot pedals to suit the most common motors. If you have a different model or any questions at any stage please call on 9546-1324 or email accessories@huntsmarine.com.au The four main models are to suit Terrova 2017 to 2024, Ulterra 2017 to 2024 80lb & 112lb, Instinct Quest 91lb/115lb and Terrova Quest 90lb/115lb.

Universal design for two or three wire configuration, 12-24 volt system. Watertight sealing cap, corrosion resistant, plated brass electrical components. Standard 28mm diameter mounting hole. Locks into receptacle to provide a watertight seal. Ergonomic soft contoured grip for easy hook up and blade alignment.

With a new stylish right angled design, this genuine Minn Kota Trolling Motor Plug and Receptacle provides continuous power rated to 60 amps up to 48V. It is designed for freshwater and saltwater applications and is fully sealed and waterproof when all connected up.

Used for the 24 volt and 36 volt engines, this 70Amp plug and receptacle has a compact and waterproof footprint and features an integrated strain relief and thumbprint locator to mate with the keyed receptacle. It suits 2 or 3 wire configurations, has corrosion resistant plated brass electrical components and accepts up to 6 AWG wire.

Suitable for 12V-42V applications these breakers are what we use for all our Minn Kota installations. They are waterproof and resetable. Suitable for all marine applications including inside engine boxes.

Suits all motors 2017 and above. Minn Kota’s advanced GPS navigation system gives you full command of your trolling motor. But when you want simplified, compact control, grab the new waterproof Bluetooth Micro Remote accessory for quick command of Spot-Lock, speed, steering and AutoPilot. Navigation systems can learn multiple remotes for increased flexibility. 

This Minn Kota i-Pilot Wireless Remote is compatible with bluetooth enabled i-Pilot systems 2017 models and newer. It can be paired with multiple remotes to add increased flexibility to your setup.

Minn Kota I-Pilot remote pre 2017 non BT. i-Pilot remote for pre Bluetooth motors features a backlit LCD screen delivering instant feedback on active functions, speed, prop on/off status, battery power and gps signal strength. All encased in a water proof, fully gasketed remote.

The i-Pilot Link remote (2017 - 2023) can learn multiple remotes for added flexibility. The remote’s customisable, touchscreen display shows your current function, user menus, GPS signal strength, prop status and battery state. Powered by a rechargeable battery, and the remote is waterproof. i-Pilot Link charging cable not included (sold separately). Compatible only with Bluetooth-enabled motors.

Waterproof remote is lightweight with intuitive user menus and simplified keypad with four customisable One-Boat Network buttons, three on the keypad and one side button. Program these buttons to functions that fit any fishing style, control connected Talon or Raptor shallow water anchors, Auto Stow/Deploy and Power Trim with RT Instinct and Ulterra models or even mark a waypoint on a connected Humminbird fish finder. Includes Minn Kota lanyard and carabiner and is powered by 2 AA batteries (included).

Bracket to suit the Quest remote above.

The BLA Marine Performance DC DC Lithium Battery Charger is ideal for charging house and trolling motor lithium batteries whilst underway. The charger is ideally suited to the rigors of on board applications with each unit in a robust alloy housing, which is shockproof and water/ dust proof to IP65. It is configured to voltages for use with most lithium batteries (refer to batteries charge requirements), and utilises an ignition wire for activation for charging from the start battery. This ignition wire makes it suitable for use with wet, AGM or lithium start batteries. The charger has battery safety at mind with mulit-stage charging and features over voltage, over temperature, over current and short circuit protection. Dimensions are 200mm X 78mm X 33mm. Further Specs are in one of the photos so scroll through.

The ProSport 6 Amp fixed charger is prewired for easy installation and is 100% waterproof and saltwater tested. Its exclusive microprocessor and software ensures that all of the available charging amperage is fully utilized to meet the unique demands of each onboard battery and charge it in the most efficient way. All ProSportHD Generation 4 Chargers boast a new tri-surface heatsink design. This new heavy-duty lightweight design delivers significantly faster charging through optimal cooling, while delivering true rated amp output during charge mode. ProSportHD’s enhanced microprocessor and software provides new digital features including: fuel gauge style Charge Completion Monitor, Charge Mode, individual Fault indicators and three digitally selectable performance charge profiles for Flooded (lead acid), AGM and GEL batteries. Fully automatic 5-stage charging enhances battery performance while extending battery life. System Check OK and Battery Status indicators provide real time installation and battery fault status. Designed for use in harsh environments with our industrial grade jacketed 1.8m DC and AC power cables which include new molded strain reliefs and wire splitters.