X
Stainless Steel Transducer Spray Deflector - Tabs Up - 3 sizes
$40.00
This transom mount stainless steel transducer spray deflector can solve a lot of your problems. It allows you to run the transducer deeper in the water to get a better reading but you don't have to be worried about the resulting salt spray getting sucked into your engine. It is 150mm wide at its widest point and is either 135mm, 200mm or 250mm long.
Brand:
Hunts Marine
SKU: BM90014
X
Stainless Steel Transducer Spray Deflector - Tabs Down - 3 sizes
$40.00
This unit is the same dimensions as the one above however the mounting tabs are bent down so it can fit on a smaller transducer bracket. This is the one you should get for almost all Quintrex and Stacer boats (and any other brand of alloy boat) that has a welded on transducer bracket. It is 150mm wide at its widest point and is either 135mm, 200mm or 250mm long.
Brand:
Hunts Marine
SKU: BM90131
X
Adjustable Aluminium Transducer Bracket - Small
$14.95
This transom mount adjustable aluminium transducer bracket is 200mm tall and the mounting panel is 50mm by 85mm.
Brand:
Hunts Marine
SKU:
X
Rail Mount Multi Purpose Mounting Bracket
$14.95
Perfect for rail mounting lights, antennas or practically anything, it can be mounted vertically or horizontally and suits rail sizes up to 25mm. Made from heavy duty aluminium it comes with an with 8mm hole that can be easily drilled out for larger applications. All mounting parts including nuts, bolts and washers are made from stainless steel.
Brand:
Hunts Marine
SKU: SHRMUB101
X
Cable Cover Kits - Black or White
$5.00
Available in Black or White, this Cable Cover Kit is ideal for covering cable entries on transoms, instrument panels and aluminium or fibreglass dashes. It can cover holes up to 28mm diameter and the snap in plastic bush stops cables wearing on any sharp edges as they vibrate or move around. Mounts simply with 2 by 6 gauge screws. (not supplied)
Brand:
Hunts Marine
SKU: W1575
X
Adhesive Stern Pad Mounting Blocks - 2 Sizes (Black or White)
$74.95
Save your transom and maintain the value of your boat by using a Stern Pad instead of drilling holes. Made in the USA from specially treated synthetic plastic, the Stern Pad is a mounting block for transducers, LED lights, pumps, antennas, and other devices that can be attached to a boat. Available in 2 colours and in either small or large sizing, they have a holding rating of 200kg and are all supplied with 3 cable clips. They can be painted if desired. The small size is 114mm by 89mm by 19mm and the large is 165mm by 120mm by 25m.
Brand:
Hunts Marine
SKU: 36662
X
Stainless Steel Transom U Bolts - 5 Sizes
$6.00
304 grade stainless U bolts with crimped shaft for all transom mount applications. Comes with cross plate, 2 washers and 2 nuts. They are available in 5 sizes: Click on Product Name above to see full details of fitting and sizing to suit your boat.
Brand:
Hunts Marine
SKU: RWB2413
X
Stainless Clam Shell Vents - 2 Sizes
$3.00
Available in the 2 sizes of 40mm or 53mm (overall width at widest point) they are great for dressing up and sealing cables that run through your transom. Can also be used to neaten up where cables run out of a dash or side panel as well. When using on the transom just make sure you also seal up the hole with plenty of silicon or sikaflex.
Brand:
Hunts Marine
SKU: W1731
X
Adjustable Aluminium Transducer Bracket - Large
$22.95
This transom mount adjustable aluminium transducer bracket is 200mm tall and the mounting panel is 90mm by 150mm.
Brand:
Hunts Marine
SKU: RWB2152
X
Black Nylon Cleats - 4 Sizes
$3.00
Used on a lot of boats, particularly aluminium boats, these cleats are made of a strong black UV resistant nylon material. They have a flat base with two central fastening holes through the cleat posts.
Brand:
Hunts Marine
SKU: RWB950
X
BLA Super Heavy Duty Alloy Universal Mount
$225.00
The BLA Extreme electronics mount is made from black anodised billet alloy with stainless steel and threaded sleeves. It has a 360 degree top and base plate with a 90 degree vertical adjustment so there is simply no position you can't face the head unit. Both adjusters feature large teeth which are designed strong to hold in all conditions. The round base plate is 95mm diameter and 10mm thick, the length of the adjustable arm is 170mm and the large universal top mounting plate is 235mm by 65mm and also 10mm thick.
Brand:
Hunts Marine
SKU: 109500
X
Replacement Quick Release Pin
$24.95
Replacement quick release pin kit to suit both stainless steel bow rollers above.
Brand:
Hunts Marine
SKU: SP389
X
RAM Universal Sounder/Electronics Mount - Vertical Mount
$150.00
The RAM-109VU single swing arm mount consists of a 6" long swing arm mounted on a vertical surface mounting base. At the device mounting end of the mount is a rectangular 6.25" x 2" plate with universal holes already predrilled. There are two (2) pivoting points on the mount. One at the swing arm and base and one at the center of the rectangular plate and the end of the swing arm. Each pivoting point allows a complete 360 degree rotation.
Brand:
Hunts Marine
SKU: RAM-109VU
X
RAM Universal Sounder/Electronics Mount - 38mm ball
$95.00
The RAM-111U consists of a 63mm diameter round base that contains the universal hole pattern, STANDARD LENGTH double socket arm and 158mm x 52mm rectangle base. The rectangle base contains different combinations of pre-drilled holes which will match up to many electronic devices and mounts, including Marine GPS, VHF Radios, Fishfinders, Gimbal Brackets and more. Overall length 186mm and will hold up to 1.8kgs.
Brand:
Hunts Marine
SKU: RAM-111U
X
Heavy Duty Open Base Stainless Cleats - 4 Sizes
$29.95
Attractive, strong and corrosion resistant, these solid bar cleats are made from polished 316 stainless and will last a lifetime.
Brand:
Hunts Marine
SKU: RWB1289
X
Solid Chrome Plated Brass Bow Roller
$143.55
Made from solid chrome plated brass, this bow roller has been around forever and is extremely strong. It has a spring loaded retaining pin that can never completely fall out. The overall length is 145mm, max width is 75mm and the roller width is 25mm.
Brand:
Hunts Marine
SKU: RWB2271
X
Pressed Aluminium Bow Roller
$64.00
Made from bright polished pressed aluminium its ideal for alloy boats. It comes complete with a removable retainer pin and a strong black nylon roller. The base is plain with no holes drilled so you can match any old holes. The base is 120mm by 57mm and the overall length is 187mm.
Brand:
Hunts Marine
SKU: RWB3914
X
Handle - Cast Stainless
$21.95
This solid heavy duty cast stainless handle is made from 316 grade stainless steel. It's 145mm long and 43mm high and has 4 by 5mm countersunk fastening holes
Brand:
Hunts Marine
SKU: RWB2226
X
Stainless Fold Down Cleat - 155mm
$49.95
155mm long, the low profile heavy duty cast stainless steel fold away cleat is now used on many brands of boats we sell including CruiseCraft. It simply folds down when not in use to create an extremely smooth non-obstructing deck fitting with low profile appearance. Indented finger lift for easy retrieval, simply push to fold away. Height when folded down is just 10mm.
Brand:
Hunts Marine
SKU: 99109
X
RAM Universal Sounder/Electronics Mount - Horizontal Mount
$130.00
The RAM-109HU single swing arm mount consists of a 6" long BENT swing arm mounted on a horizontal surface mounting base. At the device mounting end of the mount is a rectangular 6.25" x 2" plate. There are two (2) pivoting points on the mount. One at the swing arm and base and one at the center of the rectangular plate and the end of the swing arm. Each pivoting point allows a complete 360 degree rotation.
Brand:
Hunts Marine
SKU: RAM-109HU
X
RAM Universal Sounder/Electronics Mount - 57mm ball
$260.00
This RAM-D-111U bracket is made from powder coated marine grade aluminium and consists of a short double socket arm, one round 93mm diameter round base and one 76 x 280mm rectangular plate. The round plate contains pre drilled holes and the rectangular plate contains multiple mounting hole locations. The patented rubber ball and socket technology dampens shock and vibration, and allows for nearly infinite adjustability, So you can set your device at the perfect viewing angle, while suited for any rugged environment.
Brand:
Hunts Marine
SKU: RAM-D-111U
X
Stainless Steel Fairleads - 2 Sizes
$45.95
Sold as a pair (Port and Starboard), These fairleads come in 2 sizes and are made of hollow cast 316 stainless.
Brand:
Hunts Marine
SKU: RWB1240
X
Stainless Ski Hook
$29.95
This is the one and only ski hook on the market and has been around since boating began. Its a one piece stainless hook and bolt that passes through a chrome plated bronze base and is fitted with a wire safety lock to prevent accidental disconnection. The 5/16" (8mm) screwed shank measures 2 3/4" (70mm) from under the base.
Brand:
Hunts Marine
SKU: RWB1945
X
Heavy Duty Plastic Grab Handle - Black or White
$12.00
Made from heavy duty plastic with a PVC coating these are actually quite a stylish and function handle that can be used in the cabin or out in the weather. They have an overall height of 65mm and are 250mm long with 186mm hole centres. They have covered mounting holes and come with a pair of 2 X 1/2 inch by 3/16 stainless bolts, washers and nyloc nuts.
Brand:
Hunts Marine
SKU: 29827
