Pumps and Plumbing

Easy to install, this 30 litre live bait tank kit is 390mm Long, 260mm Wide and 290mm Deep and comes complete with heavy duty hinged lid for easy fitting to most vessels, all necessary plumbing connections, spray head plus 1.6m hose. The hatch has its own recess so all you do have a cutout big enough to suit the hatch recess and then the tank and the hatch bolt together from top and bottom and you plumb up as needed. Pump sold separately.

This is the heavy duty 30Ltr tank above plus all the fittings and plumbing you will need as displayed in the 2nd picture. 2 by 1.6mtr sections of hose are also included and the only additional thing you will need is just some 12v wiring and switch or just wire it up to a spare switch panel that you already have in the boat. 

WANT TO PLUMB UP YOUR EXISTING LIVE BAIT TANK? Flow-Rite’s Standpipe is an essential component for livewell plumbing systems and provides a secure and watertight seal between the drain hole and it also acts as the overflow. It features a threaded bottom that allows for easy installation into either the straight or elbow fittings below. It also has 2 holes within the thread so you can just unscrew it a bit to let some water out without having to take the whole pipe out and risk losing bait down the drain. Its 18" tall so you just remove the top cap and cut it down if needed.

Replacement strainer cap for standpipe above.

Replacement base for standpipe above.

Straight or Elbow, these are the live bait tank drain hole that is threaded inside to take the screw in standpipe above. It requires a 1 1/2" mounting hole and takes either the 3/4" or 1 1/8" Qwik-Lok fittings below. The red part of the Qwik-Lok fitting clips on to the tail of the drain and is 100% watertight. Your hose then goes on to the other end of the Qwik-Lok fitting. Its a great and easy system.

The Qwik-Lok Socket is a versatile and reliable plumbing solution for boats. Its precision-engineered design ensures a tight and secure fit, while its easy-to-install design provides a quick and efficient solution for connecting hoses. They are available in straight or elbow and with either a 3/4" tail or a 1 1/8" tail. 

Quality Australian made black spiral reinforced suction hose with excellent flexibility and smooth internal bore. It's flexibility makes it ideal for installations requiring tight bends. This hose is suitable for suction lines, bilge pump discharge, toilet installations and many other applications. NOT suitable for use with fuels or drinking water. Its available in 3/4 inch and 1 1/8 inch inside diameter. Price is per meter.