Suzuki Service

Even though you may be only after just one kill switch it is far cheaper and easier to just buy this kit. Includes ten moulded plastic keys to fit all Johnson, Evinrude, Mercury, Yamaha, Suzuki, Tohatsu and Honda kill switches. Driver attachment end features a tough swivel snap hook designed to prevent tangles while both keys and clip are securely held in place with stainless steel crimps.

Made form heavy duty vinyl this 12inch by 12inch bright orange propeller safety flag is a must. Just hook the elastic bungee loop over the propeller blades and you are good to go.

Oceansouth propeller covers are designed to fit all propeller styles for added safety and protection. Made from heavy duty UV Polyester they have a padded lining with 1/4" closed cell foam to prevent slippage or twisting while in transit. They are shaped to suit each prop and have press studs so no drawstring.  Not only do they protect your prop but they have a high visible red safety colour for trailering. There are 5 sizes for single prop applications and one size for dual prop applications found on some Volvo and Mercruiser sterndrive legs. Select your size below by measuring the diameter as shown in the last picture.

The jiggler fuel siphon provides a simple and easy way to siphon many types of liquids including fuel. Simply start the flow of liquid by jiggling the brass end up and down in the vertical position in the liquid. Inside diameter is 1/2 inch and the hose is 1.75m long.

Never get confused again. This oil measurer has markings on the side for 25, 50 and 100 to 1 oil ratios. Just look at how much fuel you have added in your fuel tank and then fill the container with oil at your correct ratio up to the marking for that fuel quantity. Tip the oil in your fuel tank. It’s that easy.

This universal gear lube pump fits both 946ml (quart) and 3.78Ltr (gallon) bottles and has adaptors to fit every brand of outboard and sterndrive gearboxes.

Rated to 50kg this is the main trolley that we sell pallet loads of in our accessories department and the one we use in our service department. It will suit a 2 stroke up to about 20hp and a 4 stroke up to about 15hp. It has a plated steel frame with plastic end caps on all tube ends and soft rubber hand grips. It has 150mm diameter plastic wheels. Supplied in kit form which is quick and simple to assemble.