Galley and Cabin

Made in New Zealand from quality black nylon, these jamb cleats are a great option to quickly tie off fender ropes. They come in 2 sizes to handle different rope thicknesses. The small one takes rope from 3 - 6mm and has a base size of 83mm by 18mm and the large cleat takes rope from 6 - 10mm and the base size is 108mm by 25mm.

This heavy duty solid cast 316 grade stainless steel cross bollard has been around forever and is beautifully finished and highly polished. The smaller one has a 60mm by 60mm base with an 87mm cross width and is 90mm high. The larger one has a 75mm by 75mm base with a 110mm cross width and is 115mm high. The smaller unit takes 6mm screws or bolts and the larger takes up to 8mm.

This heavy duty cast 316 grade stainless steel split bollard with spring loaded pin allows securing and fastening of the anchor chain. The split can accept 8mm to 13mm chain depending on the size. The smaller unit has a 60mm by 60mm base and is 84mm high and can take chain size up to 10mm. The larger unit has a 85mm by 85mm base and is 115mm high and can take chain up to 13mm. Both sizes take 6mm fastening screws or bolts.

Sold as a pair (Port and Starboard), These fairleads come in 2 sizes and are made of a UV resistant black nylon.

Sold as a pair (Port and Starboard), These fairleads come in 2 sizes and are made of hollow cast 316 stainless.

Made from bright polished pressed aluminium its ideal for alloy boats. It comes complete with a removable retainer pin and a strong black nylon roller. The base is plain with no holes drilled so you can match any old holes. The base is 120mm by 57mm and the overall length is 187mm.

Made from solid chrome plated brass, this bow roller has been around forever and is extremely strong. It has a spring loaded retaining pin that can never completely fall out. The overall length is 145mm, max width is 75mm and the roller width is 25mm.

Available in 2 sizes, its made from heavy duty 304 grade pressed stainless steel and has a 50mm black nylon roller. The quick release captive pin retains your rope and chain on the roller and both come with 3 by 6mm c/sunk mounting holes. The small has a total length of 195mm and a base length and width of 100mm by 55mm. The large has a total length of 220mm and a base length and width of 125mm by 55mm.

Available in 2 sizes, its made from heavy duty 316 grade pressed stainless steel and has a 50mm black nylon roller. The quick release captive pin retains your rope and chain on the roller and both come with 3 by 6mm c/sunk mounting holes. The small has a total length of 335mm and a base length and width of 105mm by 55mm. The large has a total length of 360mm and a base length and width of 130mm by 55mm.

Replacement quick release pin kit to suit both stainless steel bow rollers above.

Stop your rope and chain from damaging your deck and ensure the smooth operation of your anchor winch with these deluxe 5mm plate marine grade 316 stainless steel anchor rollers. They are hand polished to a mirror finish and include our high performance nylon rollers. Best suited for fitment at the edge of your anchor well when installing your electric drum winch.

Made from stainless steel, the oval Hawse hole is 160mm long by 115mm wide by 34mm high and has a throat diameter of 105mm by 52mm. The lid is permanently attached with a security chain and the cutouts in the lid and base fits into the anchor chain to hold the lid down.

Hand polished marine grade 316 stainless steel hawse pipe is perfect for cuddy cabs, centre consoles or bow riders with very small anchor wells. The rope and chain simply comes straight up through the deck and out to the bow roller. Opening Dia:76mm H: 140mm D: 140mm

304 grade stainless U bolts with crimped shaft for all transom mount applications. Comes with cross plate, 2 washers and 2 nuts. They are available in 5 sizes: Click on Product Name above to see full details of fitting and sizing to suit your boat.

This is the one and only ski hook on the market and has been around since boating began. Its a one piece stainless hook and bolt that passes through a chrome plated bronze base and is fitted with a wire safety lock to prevent accidental disconnection. The 5/16" (8mm) screwed shank measures 2 3/4" (70mm) from under the base.

This heavy duty transom ski ring is made from stainless steel and is through deck bolted. The thread length is 50mm and it is supplied with the mounting plate, washers and nuts. The distance between the two bolts is 54mm centre to centre.

Made from 304 stainless steel they have a welded eye and 4 by countersunk holes drilled. Click on the 2nd picture to see the dimensions of each one. Note: the SWL is approx 25% of ultimate breaking load.

Made from 304 stainless steel they have a welded eye and welded ring and 4 by countersunk holes drilled. Click on the 2nd picture to see the dimensions of each one. Note: the SWL is approx 25% of ultimate breaking load.

Made from 304 stainless steel they have a 2 piece body and dee ring that folds down and is only 14mm high when not in use. The overall dimensions of both are 65mm by 50mm and you can have either a 6mm by 40mm dee ring or a 8mm by 40mm dee ring.

Made from cast 316 grade stainless steel, the pad eye folds down after use. 2 piece construction with a cast base with 3 x countersunk fastening holes and cast folding dee ring. Click on the pictures for further dimensions.

Made in Sweden, Zipwake is the world's first Dynamic Trim Control System which incorporates a state of the art series of durable, fast acting interceptors, eliminating the well known trim problems of planing and semi planing hulls. The S Series suits boats between 17 to 50 feet. The system is fully automatic and significantly enhances performance, fuel economy, comfort and safety when accelerating and cornering. Thye have a built in GPS, 3D Gyro and 3D Accelerometer. 

A kit box includes all the parts needed to install a dynamic trim control system with one pair of fast acting interceptors. There are 4 different kit boxes, one for each length of interceptor model. The 4 different kits are the different interceptor lengths of 300mm, 450mm, 600mm and 750mm. The two most common kits by far are the 300mm and the 450mm and are the ones used on all our trailerboats including the large Yellowfin plate boats and the CruiseCrafts.

Each kit contains a pair on interceptors with 3mtrs cables on each, the control panel with a 7mtr cable and the distribution unit with a 4 mtr power cable. Dimensions of the control panel and the interceptors are in the pictures.

The adaptor plate kits are available in the 300mm and 450mm widths. They allow boaters to easily upgrade to Zipwake from another similarly sized interceptor system. The plates streamline hull preparations to upgrade to Zipwake Series S, fitting perfectly to the existing transom screw hole pattern and sealing previous holes for thru hull fittings. An Adaptor kit includes two adaptor plates, 2 O-rings, screws and an installation guide.