Products

Matt black aluminium switch panel with 6 red illuminated rocker switches and 6 circuit breakers. Comes with 2 by 5amp, 2 by 10amp and 2 by 15amp circuit breakers. Suitable for 12volt only. Height = 165mm, Width = 115mm.

Matt black aluminium switch panel with 6 red illuminated rocker switches and 6 fuse holders. Comes with 5 by 5amp fuses and 1 by 15amp fuse. Suitable for 12volt only. Height = 165mm, Width = 115mm.

Suitable for 12v or 24v applications it has an aluminum backing panel with 6 rocker switches with blue LED indicator lights when on as well as a cig socket, dual USB socket and voltmeter. It is completely pre-wired with 15A fuse holders and comes with customised labels for literally everything that you would be likely to connect. Panel size is 180mm X 110mm and the corners are all predrilled for 4mm diameter countersunk screws.

If you want a quick solution to a master battery switch then this is not a bad option. It is a brass battery terminal with a quick release knob. Simply turn the knob to disconnect the battery power and separate the terminal.

The BEP Splashproof Switch Panels are a stylish and quality contoured, moulded plastic panel with a removable cover plate over the switches to conceal the screws. Each switch has a backlit LED Red or Green light so you can see at a glance if they are on or off. They are available with and without fuses (blade type) and both come standard with a 29 piece label set. Suitable for 12volt only. Height = 158mm, Width = 110mm with a 75mm intrusion.

Same top quality BEP Contour switch panel as above except it has 6 built in Positive Temperature Coefficient (PTC) resettable fuses. PTC fuses are solid state 9 amp resettable fuses where all you do is turn the particular switch off for 10 secs to reset. Comes standard with a 29 piece label set. Suitable for 12volt only. Height = 158mm, Width = 110mm with a 75mm intrusion.

This Contour BEP switch panel suits both 12volt and 24volt applications. They are an injection moulded plastic panel with modern contour styling with a switch tray featuring a Rubber mounting gasket and integral cover seal. They come in 2, 4 and 6 gang with or without fuses and then you can also choose between black or white. Both black and blue interchangeable contour wave trims are included and the panels can be mounted horizontally or vertically due to the unique label design that is readable from both angles. They have a Red LED indicator light to show when the switch is turned on. Dimensions are all 63mm wide with a 25mm intrusion and then the length is 71mm for the 2 gang, 119mm for the 4 and 167mm for the 6. All BEP Splashproof Switch Fuse Panels are supplied complete with a 28 piece label set. 

This BEP on/off battery switch is high quality and small so it perfect for trailer boats where a nice neat installation is crucial. It's rated to 275 amp continuous, 455 amps intermittent and 1250 amps cranking. It suits applications up to 48volt. Dimensions are 69mm X 69mm X 75mm.

This BEP twin battery switch is high quality and small so it perfect for trailer boats where a nice neat installation is crucial. It's rated to 200 amp continuous, 300 amps intermittent and 1000 amps cranking. It suits applications up to 48volt. Dimensions are 69mm X 69mm X 75mm.

This is the twin battery switch above with a Voltage Sensitive Relay (VSR) all pre-wired in. With the selector switch in position 1, it becomes the sensing battery for the VSR. When the engine is first started the relay is open and remains open until the selected battery reaches a pre-set 13.4 volt. The relay closes at the rated voltage providing charge to both batteries. When the selected battery voltage drops below 12.8 volt, the DVSR disengages, separating the batteries and ensuring that battery 1 is not discharged by house loads. When the selector switch is in position 2, this becomes the sensing battery and the reciprocal occurs. When the selector switch is in the both position the DVSR is inactive and the charge and load is distributed evenly between the batteries. With this system the loads are run off the same battery as the engine starting battery. Dimensions are 69mm X 69mm X 138mm.

These BEP switch panels suits both 12volt and 24volt applications and have a built in 20mm power socket. All BEP Splashproof Switch Fuse Panels are supplied complete with a 28 piece label set. They are high quality and not a cheap copy. They are all pre-wired and have spade fuses already wired into the back of the units for easy installation. They come in both BLACK and WHITE in each size. The dimensions of the 3 and 5 gang panels are the same. Overall Size: 107mm x 95mm Cut Out Size: 87mm x 75mm Intrusion: 75mm. Labels Supplied: Anchor Light, Accessories, Aerator, Autopilot, Bait Tank Pump, Bilge Pumps, Blower, Cabin Lights, Cockpit Lights, DC Outlets, Deck Wash, Depth Sounder, Fridge, Freshwater Pump, GPS, Horn, Instruments, Inst. Lights, Navigation Lamps, Radar, Spare, Spot Light, Stereo, Stern Light, Trim Tabs, VHF, Winch & Wiper.

These BEP switch panels suits both 12volt and 24volt applications. All BEP Splashproof Switch Fuse Panels are supplied complete with a 28 piece label set. They are high quality and not a cheap copy. They are all pre-wired and have spade fuses already wired into the back of the units for easy installation. They come in both BLACK and WHITE in each size. The dimensions of the 4 and 6 gang panels are the same. Overall Size: 107mm x 95mm Cut Out Size: 87mm x 75mm Intrusion: 55mm. Labels Supplied: Anchor Light, Accessories, Aerator, Autopilot, Bait Tank Pump, Bilge Pumps, Blower, Cabin Lights, Cockpit Lights, DC Outlets, Deck Wash, Depth Sounder, Fridge, Freshwater Pump, GPS, Horn, Instruments, Inst. Lights, Navigation Lamps, Radar, Spare, Spot Light, Stereo, Stern Light, Trim Tabs, VHF, Winch & Wiper.

This BEP switch panel suits both 12volt and 24volt applications and has a built in USB dual charging socket. All BEP Splashproof Switch Fuse Panels are supplied complete with a 28 piece label set. They are high quality and not a cheap copy. They are all pre-wired and have spade fuses already wired into the back of the units for easy installation. Overall Size: 107mm x 95mm Cut Out Size: 87mm x 75mm Intrusion: 55mm. Labels Supplied: Anchor Light, Accessories, Aerator, Autopilot, Bait Tank Pump, Bilge Pumps, Blower, Cabin Lights, Cockpit Lights, DC Outlets, Deck Wash, Depth Sounder, Fridge, Freshwater Pump, GPS, Horn, Instruments, Inst. Lights, Navigation Lamps, Radar, Spare, Spot Light, Stereo, Stern Light, Trim Tabs, VHF, Winch & Wiper.

BEP Battery Distribution Cluster is a pre assembled module with solid links and application labels, based on the 701 Mini Battery Master Switch. BEP Battery Distribution Cluster provides for isolation of start battery and house batteries independently with the ability to emergency parallel supply from both. Ignition protected. Dimensions are 200mm high X 69mm wide X 75mm deep.

This is exactly the same as the square unit above except its available in either a vertical row or a horizontal row. The horizontal row is part number 114070 and the vertical is part number 114074. Dimensions are 69mm X 276mm wide X 69mm.

We use this one all the time in our Cruisecraft and Yellowfin boats. The Battery Management System makes twin battery charging easy! Pre-assembled module with solid links and application labels combining three 701 Mini Battery Master Switches with a 100 amp Voltage Sensitive Relay. It's easily connected to the existing wires, providing a fully automatic battery management system and provides for isolation of start and house batteries independently with the ability to emergency parallel supply from both. The VSR  (Voltage Sensitive Relay) automatically prioritises charging of the start battery. When the engine is first started the relay is open and remains open until the start battery has reached a preset 13.7 volt. At the rated Voltage, the relay closes providing charge to both batteries (start and house). When the Voltage drops below 12.8 volt (when the engine is stopped), the VSR disengages, separating the batteries. It eliminates possibility of draining the start battery and protects electronics powered by the house battery from harmful engine starting spikes. Dimensions are 140mm X 140mm wide X 75mm.

12v in line Rule bilge blower with either a 75mm or 100mm inlet and outlet. They have a sealed motor shaft for moisture protection and are very low amp draw.

75mm or 100mm concertina high flow bilge blower hose. Price is per meter when extended.

Solid brass battery terminals to suit all pole style batteries.

The brass push button horn switch is suitable for interior mounting only and is rated to 25 amps for both 12v and 24v applications. Hole diameter for mounting is half inch.

Another very common plug used in a lot of marine applications. It's surface mounted so all you have running through the dash or deck is a small hole for the wires. It screws together so will not come apart in any condition and also has a screw on cap for when not in use. Available with 2 or 4 Pins.

The BLA Marine Performance DC DC Lithium Battery Charger is ideal for charging house and trolling motor lithium batteries whilst underway. The charger is ideally suited to the rigors of on board applications with each unit in a robust alloy housing, which is shockproof and water/ dust proof to IP65. It is configured to voltages for use with most lithium batteries (refer to batteries charge requirements), and utilises an ignition wire for activation for charging from the start battery. This ignition wire makes it suitable for use with wet, AGM or lithium start batteries. The charger has battery safety at mind with mulit-stage charging and features over voltage, over temperature, over current and short circuit protection. Dimensions are 200mm X 78mm X 33mm. Further Specs are in one of the photos so scroll through.

This deluxe rocker switch with LED light is rated to 20amps and can either be mounted on its own or as a replacement in an existing panel. Suitable for 12 or 24volt applications. Comes with sealing gasket and fastens using locking tabs fixed to switch. Hole cutout is approx 20mm X 35mm.

Suitable for interior and exterior fitment this surface mounted dual 12/24volt socket with rubber covers has a standard 20mm socket as well as a USB socket. Rated to 20amp at 12volt and 10amp at 24volt.