Quintrex Genuine Parts
$8.90 freight Australia wide (Excludes heavy or bulky items and delivery to remote areas). All orders ship in 1 to 3 days and we will contact you if items are on back-order and are going to be longer
X
Yellowfin Live Bait Tank replacement Hatch and Lid
$172.40
This is the Trem black plastic waterproof live bait tank hatch assembly for your Yellowfin. Dimensions of the lid are 270mm by 375mm and it comes with the inner cut out section as well as per the picture. Dimensions of the cut out are approx 295mm by 195mm.
Brand:
Quintrex
SKU: 160208
X
Quintrex Catch and Release Trailer Latch
$499.00
Exclusive to Quintrex, this is a fantastic product and allows you to launch and retrieve your boat on your own with ease. We put it on almost all of our stock boats now as standard as we know people will want it. It comes with both parts and can be retro fitted to most older boats and trailers. The gap between the two arms that hold the bow roller must be 100mm as per image attached. If your gap is 75mm then this unit will not work. Note: For packages below 2 Tonne all up, if you purchase the 2 piece winch platform and post below, which is what comes standard on a Quintrex/Stacer trailer, then the Catch will fit a lot easier as its all at the correct angles. Provided your trailer has this new style winch post then if you would like us to fit the catch it is just a $198 flat fee.
CLICK HERE to watch a great short video on the Catch and Release in operation.
Note: CLICK HERE for fitting instructions when you receive the unit. None are supplied in the box when shipped.
CLICK HERE to watch a great short video on the Catch and Release in operation.
Note: CLICK HERE for fitting instructions when you receive the unit. None are supplied in the box when shipped.
Brand:
Quintrex
SKU: 161117
X
Quintrex 2 Piece Winch Platform to suit Catch and Release
$145.00
This is the Genuine Winch Platform for the 2 piece bow post setup to exactly suit the Catch and Release. Whilst the Catch can be fitted to most older trailers provided the gap is the required 100mm, if you have this winch platform, and the post below it, then the catch will fit a lot easier as its all at the correct angles.
Brand:
Quintrex
SKU: A_WMAL
X
Quintrex 2 Piece Winch Post to suit Platform above
$145.00
This is the Genuine Winch Post to suit the Platform above. At the bottom, the U bolts that are supplied suit draw bars that are 75mm by 75mm which is 3 inch by 3 inch.Â
Brand:
Quintrex
SKU: A_WPAL
X
Quintrex Catch and Release Replacement Handle
$19.95
Replacement black nylon handle for the Quintrex Catch and Release trailer system above. It's approx 100mm long and 30mm diameter and is slightly tapered each end.
Brand:
Quintrex
SKU: 161112
X
Quintrex/Stacer Trailer 75mm Bow Roller Assembly
$24.95
Bow Roller assembly to suit Quintrex and Stacer Trailers with 75mm gap. Supplied with bolt, washers and nut as well.
Brand:
Quintrex
SKU: A_BRA75
X
Quintrex/Stacer Trailer 100mm Bow Roller Assembly
$29.95
Bow Roller assembly to suit Quintrex and Stacer Trailers with 100mm gap. Supplied with bolt, washers and nut as well.
Brand:
Quintrex
SKU: A_BRA100
X
Quintrex Trailer 6" Cotton Reel Keel Roller
$12.00
Whilst you can use a normal 6" poly cotton reel roller, this is the genuine version that has the same profile as your other ones. The inside diameter is 19mm and the overall length is 150mm or 6 inch.Â
Brand:
Quintrex
SKU: 550002
X
Quintrex Trailer Plastic Dress Cap
$24.95
This is the centre dress cap that clip into the black alloy mag wheels. Approx diameter of where it clips in is 65mm. Note: its common for these to fall out on long trips so we recommend gluing them in.
Brand:
Quintrex
SKU: 570036
X
Yellowfin Trailer Plastic Dress Cap
$24.95
This is the centre dress cap that clip into the black alloy mag wheels. Approx diameter of where it clips in is 65mm. Note: its common for these to fall out on long trips so we recommend gluing them in.
Brand:
Quintrex
SKU: 570099
X
Quintrex Single Keel Roller Assembly
$39.95
This is the genuine single keel roller assembly on most of the Quintrex and Stacer trailers. Dimensions are in the picture. The posts are 2cm square and the distance centre to centre of the posts is 130mm. Height of each post is 140mm.
Brand:
Quintrex
SKU: A_SKR
X
Quintrex Double Keel Roller Assembly
$79.95
This is the genuine double keel roller assembly on most of the Quintrex and Staver trailers. Dimensions are in the picture. The posts are 2cm square and the distance centre to centre of the posts is 130mm. Height of each post is 140mm.
Brand:
Quintrex
SKU: A_DKRS
X
Quintrex Current Model Trailer Clearance Lights - White and Red/Amber
$29.95
These are the trailer clearance lights that are used on the current range of Quintrex and Stacer Trailers but can be retro fitted to anything. They are LED and waterproof and can just be hard wired in to the existing trailer wiring or use the quick connect plug if you have that system. (If hard wiring just cut the plug off and make sure you seal the connection well with a bit of heat shrink). They are supplied as 1 only so if you need to do both sides make sure you order 2 or however many you need and the correct colour. Black plastic base dimensions are 55mm long by 35mm wide and the screw holes are 30mm apart.
Brand:
Quintrex
SKU: 535085
X
Quintrex Current Model Slim Line Trailer Light - Port Side
$49.95
This are the rear trailer lights that are used on the current range of Quintrex and Stacer Trailers but can be retro fitted to anything. They are LED and waterproof and can just be hard wired in too the existing trailer wiring or use the quick connect plug (comes with 1mtr lead) if you have that system. (If hard wiring just cut the plug off and make sure you seal the connection well with a bit of heat shrink). They are supplied as 1 only so if you need to do both sides make sure you purchase the Starboard one below as well. Black plastic base dimensions are 150mm long by 80mm wide and the screw holes are 100mm apart.
Brand:
Quintrex
SKU: 535082
X
Quintrex Current Model Slim Line Trailer Light - Starboard Side
$54.95
This are the rear trailer lights that are used on the current range of Quintrex and Stacer Trailers but can be retro fitted to anything. They are LED and waterproof and can just be hard wired in too the existing trailer wiring or use the quick connect plug (comes with 1mtr lead) if you have that system. (If hard wiring just cut the plug off and make sure you seal the connection well with a bit of heat shrink). They are supplied as 1 only so if you need to do both sides make sure you purchase the Port one above as well. Black plastic base dimensions are 150mm long by 80mm wide and the screw holes are 100mm apart. Note: This one has the clear numberplate light at the base.
Brand:
Quintrex
SKU: 535083
X
Quintrex 7 Pin Trailer Plug with 1mtr lead and joiner
$29.95
This is a replacement 7 pin trailer plug with a prewired 1mtr lead that plugs in to the rest of the trailer wiring.
Brand:
Quintrex
SKU: 535081
X
450mm Flipper Guide Kit - Pair
$135.00
If you have a trailer with just the cotton reel roller at the rear and your sick of having trouble lining it up with the keel then this is a must. It comes as a pair and suits any trailer that has 50mm by 50mm (2 inch by 2 inch) cross member. It's super easy to fit but make sure you line up the end of the blue skid so it overhangs the keel roller by about 5mm to 10mm so the keel of your boat cannot go anywhere but to the centre of the roller. Note: You don't adjust the skids up to touch the bottom of the boat, they are there to slip the keel down onto the keel roller and are not designed to take any of the boat weight. Also when drilling the pivoting bolt through the skid make the inner length longer than the outer length (like in the picture) so the skids always flop towards and slightly on top of the keel roller. IF YOU DRILL EXACTLY IN THE MIDDLE THEN WHEN IMERSED IN THE WATER THE SKID CAN FLOP OUTWARDS.
Brand:
Quintrex
SKU: A_SK450
X
450mm Gluider Guide Kit - Pair
$195.00
This is the exact same product as the flipper kit above except it comes with a 2nd set of longer arms so that you can have it at a fixed angle. It comes as a pair and suits any trailer that has 50mm by 50mm (2 inch by 2 inch) cross members. It's super easy to fit but make sure you line up the end of the blue skid so it overhangs the keel roller by about 5mm to 10mm so the keel of your boat cannot go anywhere but to the centre of the roller. Note: You don't adjust the skids up to touch the bottom of the boat, they are there to slip the keel down onto the keel roller and are not designed to take any of the boat weight.Â
Brand:
Quintrex
SKU: A_SK450GK
X
500mm C Section Plastic Skid
$16.50
This heavy duty C section blue skid fits on the rear trailer guides. It is approx 500mm long and is riveted into place (rivets not supplied). The internal dimensions of the C section are approx 45mm wide and 15mm deep either side. It is supplied as one only so if you need to do both then make sure you order 2.
Brand:
Quintrex
SKU: 565308
X
Quintrex Spare Wheel Carrier to suit I beam alloy Trailers
$115.00
This spare wheel carrier suits all alloy I beam trailers from 2013 and on and suits both Ford and Holden stud patterns. Supplied with 4 mounting bolts as well as 3 wheel studs with nut.
Brand:
Quintrex
SKU: A_SWCRLD
X
Quintrex MEYER Jockey Wheel Handle
$19.95
If you have a Quintrex/Stacer trailer and your jockey wheel looks like the one in the 2nd picture and has the brand MEHER stamped on it then this is your jockey wheel handle. It has a grub screw to hold it on to the shaft. The grub screw is opposite to the flat section in the head of the handle. Make sure you look at all the photos.
Brand:
Quintrex
SKU: 570005
X
Quintrex 13" and 14" White Mudguards - each
$59.95
This is the genuine 13" and 14" Meher white mudguard to suit almost all Quintrex and Stacer trailers. Just check that your wheels are 13" or 14" first. (will be on the side wall of the tyre). Price is for 1 only.
Brand:
Quintrex
SKU: 545005
X
Quintrex White Mudflap - each
$14.95
This is the genuine white mudflap to suit all Quintrex and Stacer trailers. Its the same flap for trailers with 13" or 14" wheels or for single or tandem axle trailers. There is only one type and size and this is it.
Brand:
Quintrex
SKU: 545009
X
Quintrex Meher Mechanical Caliper
$74.95
Almost all Quintrex and Stacer trailers in the last 10 years or so have Meyer brake components. The Meyer name will be stamped on the caliper arm and will be easy to see. If you have a Meyer caliper and it is a mechanically braked trailer (not electric/hydraulic brakes) then this will be the replacement caliper to suit. It comes with 2 new brake pads. Make sure you grease up the slides when you bolt the new caliper to the axle.
Brand:
Quintrex
SKU: 566500
